right, but how do i put all the peices back together after i smash the bell housing of the l series? cause thats the only way i ` can get the bell housing of the l series. i have a 5speed and 4 speed l series and both have a bell housing which is MOLDED to the case......
mark k ----- Original Message ----- From: "Andrew Greenbury" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 02, 2002 11:02 AM Subject: RE: gearbox? for sr20 rwd. > Cool thanks Errol. > > There you go Mark - get a cheap L series or whatever gearbox and > just use an SR bellhousing with the suitable mods. > > > Yep they can be bolted to cheaper 71B boxes. Depending on the version of the > > box, you need to either modify the input shaft bearings and countershaft > > bearings in the housing and make some sleeves for the shifter rails (they > > are smaller than the 71C box rails). > > Cheers > > Feral Errol > > [EMAIL PROTECTED] > > http://www.datrats.com.au/ > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of Andrew Greenbury > > Sent: Monday, 1 July 2002 11:21 AM > > To: [EMAIL PROTECTED] > > Subject: RE: gearbox? for sr20 rwd. > > > > Errol, > > > > So the SR gearboxes are different and an SR bellhousing cant be > > bolted to other common/cheaper nissan boxes, to adapt? > > > > > > > That's the price for SR gearboxes. I don't know of any adapter plates for > > > the SR. > > > Yes you have to have a fuel and ignition computer. > > > > > > Cheers > > > Feral Errol > > > [EMAIL PROTECTED] > > > http://www.datrats.com.au/ > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED]]On Behalf Of mark krawczuk > > > Sent: Sunday, 30 June 2002 8:16 PM > > > To: [EMAIL PROTECTED] > > > Subject: gearbox? for sr20 rwd. > > > > > > hi, i have several questions : > > > > > > i have been quoted $550 for a sr20 rwd gear box, is there a cheaper > > > alternative? > > > > > > > > > is there any plates to adapt a std bluebird 5 speed behind a sr 20? i`d > > > rather spend (for instance)$200-400 for a adapter plate to use a bb 5 > > > speed, if ya blow it up, you can get boxes any where from $80-150$. > > > > > > do you have to use a fuel AND ignition computer on a sr20 engine? > > > > > > > > > > > > > > > mark k > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
