Mark, >From Errol's description, you use the complete front section, including the bit that wraps around the input gears and the front bearings. It bolts on to the later model centre section, but you have to adjust the inner hole sizes to support the selector shafts, and fit front bearings that fit into the L series housing.
----- Original Message ----- From: "mark krawczuk" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, 2 July 2002 13:58 PM Subject: Re: gearbox? for sr20 rwd. > right, but how do i put all the peices back together after i smash the > bell housing of the l series? cause thats the only way i ` can get the > bell housing of the l series. i have a 5speed and 4 speed l series and > both have a bell housing which is MOLDED to the case...... > > mark k > ----- Original Message ----- > From: "Andrew Greenbury" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, July 02, 2002 11:02 AM > Subject: RE: gearbox? for sr20 rwd. > > > > Cool thanks Errol. > > > > There you go Mark - get a cheap L series or whatever gearbox and > > just use an SR bellhousing with the suitable mods. > > > > > Yep they can be bolted to cheaper 71B boxes. Depending on the version of > the > > > box, you need to either modify the input shaft bearings and countershaft > > > bearings in the housing and make some sleeves for the shifter rails > (they > > > are smaller than the 71C box rails). > > > Cheers > > > Feral Errol > > > [EMAIL PROTECTED] > > > http://www.datrats.com.au/ > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED]]On Behalf Of Andrew > Greenbury > > > Sent: Monday, 1 July 2002 11:21 AM > > > To: [EMAIL PROTECTED] > > > Subject: RE: gearbox? for sr20 rwd. > > > > > > Errol, > > > > > > So the SR gearboxes are different and an SR bellhousing cant be > > > bolted to other common/cheaper nissan boxes, to adapt? > > > > > > > > > > That's the price for SR gearboxes. I don't know of any adapter plates > for > > > > the SR. > > > > Yes you have to have a fuel and ignition computer. > > > > > > > > Cheers > > > > Feral Errol > > > > [EMAIL PROTECTED] > > > > http://www.datrats.com.au/ > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED]]On Behalf Of mark > krawczuk > > > > Sent: Sunday, 30 June 2002 8:16 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: gearbox? for sr20 rwd. > > > > > > > > hi, i have several questions : > > > > > > > > i have been quoted $550 for a sr20 rwd gear box, is there a cheaper > > > > alternative? > > > > > > > > > > > > is there any plates to adapt a std bluebird 5 speed behind a sr 20? > i`d > > > > rather spend (for instance)$200-400 for a adapter plate to use a bb > 5 > > > > speed, if ya blow it up, you can get boxes any where from $80-150$. > > > > > > > > do you have to use a fuel AND ignition computer on a sr20 engine? > > > > > > > > > > > > > > > > > > > > mark k > > > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
