RE: temp sensors

[Terry Rudd]

Chris,   Temp senders - The Niles gauge in a 1600 is Japanese, the only 200B sender that's compatible is off a 200B SSS engine and some 200B Wagons. Most 200B have VDO gauges and if you use the VDO sender with a Niles gauge it goes off the scale. Most 180B and 1200 with Japanese electrics (early models) have the same sender as a 1600.   L6 carbies are around 30/34, much the same as found Bluebird L20B but the L6 has larger main jets etc.   regards Terry   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chris Simpson Sent: Thursday, 12 September 2002 9:35 AM To: [EMAIL PROTECTED] Subject: Re: temp sensors Running a std carby on it for the moment, i want to keep the original look under the bonnet so im using the std filter and all.    It all seems god except that it runs on a bit, it doesnt ping at all, runs smooth, might have to check the cam shaft and make sure that i havent missed a tooth.   Also   anyone know the size of the carby on the 240K and 260C? apparently they fit onto the std 1600 manifold?  Any one got a good one in Perth they want to get rid of?   Thanks   Chris ----- Original Message ----- From: mark krawczuk To: [EMAIL PROTECTED] Sent: Thursday, September 12, 2002 7:28 AM Subject: Re: temp sensors HI,  yeah , might pay to change the timing abit., camshaft  in correctly?   what fuel setup are u running? e.g efi, carby?    mark k ----- Original Message ----- From: Chris Simpson To: ozdat Sent: Thursday, September 12, 2002 12:17 AM Subject: temp sensors Just finished installing the L/Z24 into the datto and even in this early run in stage im mighty impressed!  Got a few issues thou   1. She wants to run on after turning it off, the heads been decked about 2mm so im thinking is should retard the timing from the 10-14 degrees, to say 6-10 degrees?  sound good? also being a larger capacity (2.4L) ???   2.  Is the L20 late 200B temp sensor the same as the L16 early ones?  The temp is staying right down the bottom, if they are then its running in the nicely cool range, which i'd be happy with, its prolly about 3-4mm lower now than before (old dash style)     THanks   Chris S --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------