Take it to a machine shop and have them weld an addition onto the tab then grind it down to shape?
Luther Kaleb C. Striplin wrote: > Well, got the tranny out of the 190D finally, but in the process one of > the tabs on the TC broke. Or shall I say, a small piece of it. > Thinking it might still work, or even try JB weld on it, but I REALLY > dont want to have to do this job twice, so I would rather put one on > that is not broken. Anyway, the converter that is on the tranny I am > installing is too big to fit inside the big ring thing on the flywheel. > The converter is too big around. Anybody got one laying around? I > need one ASAP. Help. Looks like 722.400, 722.403, 722.414 use the same > converter. I will have one out of a 124 2.5 turbo, but it looks like > its going to be too big too according to epc. (245mm 190D, 270mm 190E > 2.6, and 300D 2.5) Damn. Looks like has to be out of a 190E or 190E 2.3 > _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
