Stuck in ignition/master switch? Is it stuck in the #1 position or full ON position? If it's in #1 position, leave it there, remove the cylinder and install a new cylinder - usually takes a minute or so. Immediately order a new cylinder from dealer via Rusty (need VIN). If it's not in #1 position and will not turn, attach a key to a vibrating sander (IAW my procedures of last Oct) to vibrate the lock and improve your chances of turning it to #1 position in order to remove the cylinder. I'll elaborate if you need it.
Wilton ----- Original Message ----- From: "Redghost" <[EMAIL PROTECTED]> To: "Mercedes Discussion List" <mercedes@okiebenz.com> Sent: Thursday, September 25, 2008 10:45 PM Subject: [MBZ] Trapped key > I need big help. Gump has decided to eat my key. Stuck in the on > position and will not turn or come out. What is the standard action > to take to liberate it? > > > > -- > Clay > Seattle Bioburner > > 1972 220D - Gump > 1995 E300D - Cleo > 1987 300SDL - POS - DOA > The FSM would drive a Diesel Benz > > > _______________________________________ > http://www.okiebenz.com > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com