Kroil? I take it that is penetrating oil? Tim 1982 300TD Moby
On 10/30/05, Craig McCluskey <[EMAIL PROTECTED]> wrote: > On Sun, 30 Oct 2005 00:15:18 -0400 TimothyPilgrim > <[EMAIL PROTECTED]> wrote: > > > PROBLEM: The topmost water pump bolt sheared off when I attempted to > > loosen it. > > Oops. > > > > There's about 3 mm protruding out of the block with the WP > > removed. I used a torch to heat the remaining bolts which may or may > > not have helped, but they came out okay. So what do I do to get that > > sheared bolt out? > > Well, I'd start by heating that bolt, too, and, after it's cooled down, > use some Kroil and let it sit for awhile. Then use some more Kroil and > visegrips. With the visegrips, I'd gingerly rock it back and forth > (counterclockwise and clockwise) until it loosens up. > > > > Or should I just say screw it, leave it, and put the new pump on? > > I sure would not. > > > Craig > > _______________________________________ > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://striplin.net/mailman/listinfo/mercedes_striplin.net >
