I got the line off the strainer no problem, strainer did not budge.
Going to have to remove the axle to get to it, or pull the tank.
Rich Thomas wrote:
On the 300SD when I put a wrench on the fuel line fitting nut it
turned the tank strainer out, lot easier than dealing with the big
strainer nut (which I went and bought a $25 socket for...). But if it
is buggered in there, you will have to work at it. I don't know if
the gasser is similar or not.
--R
On 6/13/2010 2:11 PM, Kaleb C. Striplin wrote:
I am going to remove the tank strainer on that 560 and the axle shaft
seems to be in the way. It seems the best way is to get a breaker
bar on it that will fit above the axle. Using an extension on a
ratchet it will run right into the axle. Is this the best way or am
I going to have to remove the axle?
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.829 / Virus Database: 271.1.1/2934 - Release Date: 06/13/10 01:35:00
--
Kaleb C. Striplin/Claremore, OK
95 E300, 94 S500, 92 500SEL, 92 300SD, 92 300E 4Matic,
91 350SDL, 91 300D, 89 560SEL, 87 300SDL x2, 85 380SE 5.0 Euro,
85 190D, 84 190D, 84 300D euro manny, 76 240D, 76 300D,
http://www.okiebenz.com
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
