I think it is. It's a "four door" model with the drawer in between the fridge and freezer. Has the worthless display on the door over the ice/water dispenser.
It's a beast, I know that. Doesn't get delivered until Saturday. Glad we have double entry doors.... Dan Sent from my iPhone On Oct 12, 2011, at 9:27 AM, Walt Zarnoch <zarnoch...@gmail.com> wrote: > If it's a "twin cool" Samsung, make DARN SURE it's level! > If not, when it's humid, you can have a nasty ice-up problem on the > cooling coils in the back. > That's fixable with a hair dryer and leveling the fridge. > > Great fridge other than that gotcha, the freezer keeps Vodka at -4F > all day every day. > > Walt > > > On Wed, Oct 12, 2011 at 8:58 AM, Dan Penoff <lwb...@yahoo.com> wrote: >> We had a kitchen full of GE Profile appliances in our last house. While most >> were good and trouble-free, the icemaker in the fridge was a PITA. >> >> The one reoccurring problem I had was the chrome plated auger in the >> icemaker. When we moved in, it was pitted and rusted, something we >> attributed to the place being unused for nearly two years prior to our >> moving in. >> >> I ordered an OEM replacement and installed it. >> >> Within a month the replacement auger was rusted and pitted as well. Rust >> particles would end up in our drinks as a result, too. >> >> I talked to GE, and since the appliance was out of warranty they pretty well >> blew me off. >> >> New house has all new Maytag appliances the seller put in. We bought a >> French door Samsung fridge because the side by side Maytag they have is less >> than 20 cubic feet. The Samsung is a behemoth.... >> >> Dan >> >> Sent from my iPhone >> >> On Oct 11, 2011, at 11:30 PM, Dieselhead <126die...@gmail.com> wrote: >> >>> I happily ditched my ~30 yr old (came with the house) GE refr a couple of >>> years ago and bought a kenmore with the condensor coils in the back (hard >>> to find). So far, the icemaker in the kenmore has performed flawlessly, >>> and is easy to turn on/off. The GE icemaker seldom worked. >>> >>> #1 Daughter bought a used GE side by side (maybe 2006 model), with ice and >>> water in the door. It makes ice, but overfills the ice bin and jams the >>> dispenser. It also refuses to dispense cubes, and always grinds the ice. >>> When the ice bin is overfilled, the bin won't come out without taking out >>> everything above it; both things stored and refrigerator parts. Really >>> irritating. >>> >>> yeah, I actually have a few things from snears that delivered reasonable >>> value! The refr was pricey for what it is, but no worse than anyone else's >>> (Major US brands) No Chinee cheapos of the normal size when i was >>> looking, but they are selling lots of washing machines and dryers in the US >>> of Wallyland. >>> >>> I never trust anything with "General" in the name. Electric, motors etc. >>> >>> If you bought it form a local dealer, ask them to fix it. If it came from >>> a big box, that is most likely futile. After the big box turns you down, >>> see if you can get the local tv station to display the problem. That might >>> embarrass the store into providing a cure. >>> >>> When I look for a new refr, I look for one with the coils in the back, >>> because they are much less likely to plug, and cause the compressor to >>> fail. Most now have the condensor under the refr, with a forced air fan. >>> This brings 2 problems. 1. Additional motor to fail 2. Bottom >>> condensors and the fan conspire to blow dust/hair etc into the coils, >>> obstructing the airflow and leading to premature compressor failure, and >>> higher electric bills. This is exacerbated in a house with animals inside. >>> I had to clean the old GE every other year, and I should have done it >>> more often, and this is without animals in the house. PITA. >>> >>> >>>> The accursed GE refrigerator I bought about 5 years ago has developed a >>>> new problem. The main sore point has been that the water line to the >>>> in-door water dispenser will freeze up whenever the ambient temperature >>>> is below about 78 degrees. This is due a design defect: the water line >>>> is routed too close to the interior side of the freezer door. As the >>>> door is filled with expanding foam insulation, rectifying this is >>>> impractical/impossible. >>>> >>>> Now, the new problem is that the ice maker fill inlet is freezing over. >>>> When this happens, water pours down the back side of the refrigerator >>>> and onto the floor whenever the ice maker goes through its dump- >>>> ice/refill cycle. >>>> >>>> I'm wondering if there might be a heating element in the water inlet >>>> that has failed. Anyone know anything about these? It's a model >>>> "GSL25IGRE BS" if that helps. I think the "BS" suffix is particularly >>>> appropriate. >>>> >>>> Allan >>>> -- >>>> 1983 300D >>>> >>>> _______________________________________ >>>> http://www.okiebenz.com >>>> For new and used parts go to www.okiebenz.com >>>> To search list archives http://www.okiebenz.com/archive/ >>>> >>>> To Unsubscribe or change delivery options go to: >>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >>> >>> _______________________________________ >>> http://www.okiebenz.com >>> For new and used parts go to www.okiebenz.com >>> To search list archives http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> >> _______________________________________ >> http://www.okiebenz.com >> For new and used parts go to www.okiebenz.com >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
