I will keep that in mind.  No cash available or place to store a replacement V8 
this month

clay


On May 23, 2012, at 7:16 PM, Peter Frederick wrote:

> I have a spare M117, from a 74 SL.  I probably don't need it, since the 280 
> has rust worms too bad to try to fix it up (floor pans in back are gone).
> 
> Peter
> 
> On May 23, 2012, at 9:06 PM, clay monroe wrote:
> 
>> I am not knowing what running rich looks like, but will learn more about 
>> that.  Compression was 140 all around but for two contiguous pistons with 
>> 130 and 120.  That side also has very minor head gasket leak.  PPI indy 
>> found all this and said the leak is a non issue at this point.  The low 
>> compression is probably due to kruff on valve that solvents will remove.  
>> Indy says to just drive it and have fun.  Rebuild or head work is more than 
>> the car is worth.  He says this to everybody and seems to hate having people 
>> spend money fixing old cars.  He is scheduled three days out and has all 
>> racks loaded.
>> 
>> If I snag a cheap rebuild M117, that is cool with me.  Or I wait, enjoy and 
>> when it goes downhill, I get him to rebuild.   He does great work.
>> 
>> clay
>> 
>> 
>> On May 23, 2012, at 4:21 PM, Frederick Moir wrote:
>> 
>>> Running rich, did you say?
>>> Poor compression in two cyls?
>>> 
>>> Gas dilution of the oel?
>>> My $0.00002 worth.
>>> 
>>> 
>>> Fred Moir
>>> Lynn MA
>>> Diesel preferred.
>>> 
>>> 
>>>> ________________________________
>>>> From: Mitch Haley <m...@voyager.net>
>>>> To: Mercedes Discussion List <mercedes@okiebenz.com>
>>>> Sent: Thursday, December 29, 2011 11:34 AM
>>>> Subject: Re: [MBZ] One bar pressure warm oil
>>>> 
>>>> Allan Streib wrote:
>>>>> First of all verify the gauge reading with a separate oil pressure
>>>>> gauge.  Harbor Freight sells them.
>>>>> 
>>>>> AFAIK for all Mercedes engines oil pressure gauge should be pegged above
>>>>> idle.  If not it might be the pressure relieve valve or spring, or you
>>>>> might have worn main bearings.
>>>> 
>>>> Is there an issue with filter stem o-rings like there is with the ON617?
>>>> 
>>>> 
>>> _______________________________________
>>> http://www.okiebenz.com
>>> For new and used parts go to www.okiebenz.com
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> 
>> _______________________________________
>> http://www.okiebenz.com
>> For new and used parts go to www.okiebenz.com
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> 
> _______________________________________
> http://www.okiebenz.com
> For new and used parts go to www.okiebenz.com
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to