If you moved pre-chambers from a 14 head, then I think machining is required on the pre-chamber so they will fully seat.
Hopefully someone who has btdt will chime in. -- Max Dillon Charleston SC '95 E300 '87 300TD Rolf <r...@winmutt.com> wrote: >#4 was leaking so bad today it was going pfft pfft pfft I could hear >it. >Temporarily I removed the injector and prechamber and seated it a bit >better. It still bubbles. Checked on the rest 2-5 are bubbling (4 is >still much more). I was pretty careful to make sure that the seats were > >nice and clean when I put the prechambers back in. They already had >spacer rings on them, should I have renewed those? > >-Rolf > >_______________________________________ >http://www.okiebenz.com >For new and used parts go to www.okiebenz.com >To search list archives http://www.okiebenz.com/archive/ > >To Unsubscribe or change delivery options go to: >http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
