Good suggestions Randy! Also, when you compare what you'd have after
putting $5K into a nice known SDL Vs buying some unknown from the local
used car dealer for $5K. To me the risk is all on the side of a $5K
unknown newbie.
Of course, for $5k I could probably find a nice W124 diesel :-) .... but
there would still be a bit of an "unknown" factor with that....
LarryT
91 300D
On 7/17/2013 11:11 AM, Randy Bennell wrote:
Let me suggest you are jumping to conclusions that have not been
confirmed.
I would think you should do a bit more of an analysis before you give up.
Get the oil tested etc.
Is the additional "oil" actually coolant or could it be diesel fuel?
If the oil is not milky, I would want to have a closer look before I
assumed it was coolant.
Might there have been an air bubble in the coolant system such that it
finally took up the fluid from the overflow resevoir?
Finally, if the rest of the vehicle is nice and you like it, why not
put another $5K in to fix it if you have to. Still a lot less
expensive than buying another vehicle if you feel the need for 2.
Just my 2 cents.
Randy
On 16/07/2013 9:42 PM, WILTON wrote:
Seriously, bring trailer, $500 and, possibly, Max; keep the 84 SD.
Wilton
----- Original Message ----- From: "Rich Thomas"
<richthomas79td...@constructivity.net>
To: "Mercedes Discussion List" <mercedes@okiebenz.com>
Sent: Tuesday, July 16, 2013 10:31 PM
Subject: Re: [MBZ] '91 350SDL bad news
Seriously let me know. I could swap an 84 SD!
--R (sent from my miniPad)
On Jul 16, 2013, at 9:53 PM, "WILTON" <wilt...@nc.rr.com> wrote:
We may do that.
Wilton
----- Original Message ----- From: "Rich Thomas"
<richthomas79td...@constructivity.net>
To: "Mercedes Discussion List" <mercedes@okiebenz.com>
Sent: Tuesday, July 16, 2013 9:50 PM
Subject: Re: [MBZ] '91 350SDL bad news
I got a trailer and $500, can be there soon... I'll bring Max.
--R
On 7/16/13 9:46 PM, WILTON wrote:
I don't plan to do any more to it. I'm not physically able to do
much to it myself, and I'm not gonna pay a fortune for somebody
else to do so.
Wilton
----- Original Message ----- From: <dsereta...@yahoo.com>
To: "Mercedes Discussion List" <mercedes@okiebenz.com>
Sent: Tuesday, July 16, 2013 9:41 PM
Subject: Re: [MBZ] '91 350SDL bad news
Interesting. So do head gaskets fail suddenly rather than
gradually in the rodbender scenarios? Could the fact that you
caught it early have saved the engine from bending a rod? If I
recall correctly the problem happens at no.1 cylinder. Will you
do a compression test to confirm location at the cylinder?
Sent from my iPhone
On Jul 16, 2013, at 9:03 PM, "WILTON" <wilt...@nc.rr.com> wrote:
No, 'doesn't look foamy or cafe au lait - probably not in there
with engine running long enough; merely looks like greatly
increased
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
