I'll give it a shot! Thanks! ;-)
Sincerely,
Larry
On 12/8/2013 9:58 PM, OK Don wrote:
Sounds like you are applying a bending force to the EZ-out. They've always
worked to me and I've never broken one. Perhaps use a tap wrench to turn it
- equal pressure on opposite side would reduce the tendency to bend it?
On Sun, Dec 8, 2013 at 7:36 PM, Larry T <l02tur...@comcast.net> wrote:
yeah, a EZ-Out - I don't know about the rest of the B-I-Yers (break it
yourself as opposed to Fix it yourself) here but every time I have tried an
EZ Out I usually break the tool off in the thing I'm tryng to remove or I
round it out. It seems dirt simple - insert, apply CCW force to break
loose but it never works for me. ;-) Suggestions on what I might be
doing wrong? I have learned one thing - getting a piece of hardened tool
steel out of a small hole is tough!
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
