I had a lot of sucess with Vice-Grip 4LW Locking Wrench with Wire
Cutter. Amazon carries it for $10.38. I had the appropriate sized
Vise-Grip 4LW Locking Wrench with Wire Cutter
On 12/8/2013 12:44 PM, Larry T wrote:
Hi Gang -
I need to remove the bleed valves from the rear calipers on my '91
300D. It looks like someone used a pair of pliers on them at one time
(definitely not me) and rounded them off. (Same for the rubber hoses
between the caliper and chassis).
I have a set of reverse drill bits as well as some things intended to
remove stuck screws/nuts/etc by digging into them and unscrewing
them. The thing is, I haven't had much luck getting them to dig into
the parts I need to remove - I end up drilling a shiny hole in the
thing I wanted to remove. and i'd rather not start something I can't
finish on the 300D - it's my wife's car. I have a stud remover but I
don't think there's enough room to fit it onto the Bleeder.. I need
to confirm that though -
So, what's the best way to remove the bleeder valves? I really
need to change the fluid...
Thanks!
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
