Great minds think alike! See your picture with red circles of what should be swapped.
------------- Max Charleston SC On Wed, Apr 6, 2016 at 4:23 PM, WILTON via Mercedes <mercedes@okiebenz.com> wrote: > My thought, too. Swap the dishwasher drain "T" with the horizontal pipe > immediately above the trap; make sure the DW drain connection is on topside > of pipe and "headed/angled" down slope (toward the trap). > > Wilton > > ----- Original Message ----- From: "Kaleb C. Striplin via Mercedes" < > mercedes@okiebenz.com> > To: "Mercedes Discussion List" <mercedes@okiebenz.com> > Cc: "Kaleb C. Striplin" <ka...@striplin.net> > Sent: Wednesday, April 06, 2016 4:10 PM > Subject: Re: [MBZ] Yet even more dishwasher talk > > > If you look at the photo I sent earlier, it looks like I could just swap >> the section where the dishwasher drain goes into to the section right above >> the trap, just swap those 2 sections of pipe. This would lower the level of >> the trap a bit. Not sure that it would matter though. >> >> Sent from my iPhone >> >> >> >> > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > >
_______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com