The wire came loose right at the connector. It looks like someone repaired it before since the wire has been stripped. I think I just pulled it out of the connector. Hopefully, I’ll have a working temp gauge once I slip it back together and tighten it down. Kevin in Hillsboro, OR 1982 240D 191Kmi, Hildegard did
Sent from my iPhone > On Sep 17, 2019, at 6:01 PM, Craig via Mercedes <mercedes@okiebenz.com> wrote: > > On Tue, 17 Sep 2019 15:26:11 -0700 Kevin Kraly via Mercedes > <mercedes@okiebenz.com> wrote: > >> Are washers required under the air filter housing mounting nuts? > > Yes. They are made of thin, spring-type material which has been bent to a > radius so they perform a locking function. > > >> Also, while Messing with the main linkage from the valve cover down to >> the IP, I knocked off the wire to what I believe is the temperature >> sending unit. Can I just take the connector apart, re-route the wire >> inside the connector, and pop it back on? > > It all depends upon where the wire came loose. > > > Craig > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
