Do you have air and an air hammer? You might try seeing if you can
vibrate things loose.
On 20/12/2019 1:24 PM, Curley McLain via Mercedes wrote:
LR subframe mount appears to be welded to the body by corrosion of
AL-FE. Soaking it now. Tried beating with no effect. tried bar,
but that bends the frame tube. Flame wrench is not an option because
I don't have one. Besides, burning rubber stinks and leaves carbon
black on everything.
Subrame mount has aluminum center for the bolt, and the body stud is
steel.
Any earlier MB would have rotted away. This one just has a few
cancer spots, but the nuts on the brake lines and hoses are corroded
to 2-3 mm less OD than original. Looks now like I should probably
replace all or part of the brake line to the ABS unit too.
My Dallas 124 is much nicer to work on. even after 10 years or so in
IA. No rust.
Max, if your subframe is not rusty, I may take you up on that....
The other 124 I got out of VA 15 yrs ago or so was not rusty. (300TE)
Meade Dillon via Mercedes <mailto:mercedes@okiebenz.com>
December 20, 2019 at 12:44 PM
Diff is only connected to subframe. I think you've hit all the right
points.
I've got a spare subframe (no diff or axles) you can have if you want to
drag it away from SC.
-------------
Max
Charleston SC
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com