It can also be handy to have two sets of feeler gauges, so that you're not constantly flipping the blades back and forth on one set for the intake and exhaust clearances.
Allan dan--- via Mercedes <mercedes@okiebenz.com> writes: > I have a little chart of the valve arrangement for the OM617 with the order > to adjust them in that prints on a 3x5 index card. Print it out, Mark them > off as you do each, throw paper away. > > I can dig a copy out for anyone who wants it, send me a PM. > > -D > >> On Jan 25, 2021, at 5:32 AM, Buggered Benzmail via Mercedes >> <mercedes@okiebenz.com> wrote: >> >> I got wrenches from a pawn shop and put the torch to them and bent them. >> Makes the job easier. >> >> --R >> Sent from iPhone >> >>> On Jan 25, 2021, at 1:45 AM, Scott Ritchey via Mercedes >>> <mercedes@okiebenz.com> wrote: >>> >>> The special bent wrenches are a bit faster but >>> regular wrenches will work _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com