This machine has 2 pressure transducers one for the low side and one for 
accumulator. When I switch the connectors between the 2 the error changes to 
accumulator pressure error so to me that tells me the low pressure one is bad. 
If I leave the connections disconnected I get no error. The bigger problem is 
why it’s venting refrigerant.  I suppose I could pay the diagnostic fee and see 
what I am looking at. Just afraid even if I get it fixed then something else 
goes wrong. I guess I could buy that one like mine and keep this one for parts. 

Sent from my iPhone

> On Apr 5, 2022, at 8:42 PM, Allan Streib via Mercedes <mercedes@okiebenz.com> 
> wrote:
> 
> If it were me and I trusted the shop I would probably pay the $180 for the 
> diagnostic. Once you know what's wrong, you can decide whether to have them 
> repair it, do it yourself, or replace it.
> 
> Otherwise it's a careful, deliberate process of testing and elimination to 
> figure out what is wrong and repair it. What is your time worth?
> 
> 
>> On Tue, Apr 5, 2022, at 9:24 PM, Kaleb Striplin via Mercedes wrote:
>> I have a Robinair 34788 fully automatic machine that I have had for 
>> about 4 or so years now.  Nearest I can tell it is probably 10-15 years 
>> old, not sure.  Per the menu look like it has has around 2600 lbs ran 
>> thru it.  Not sure if that is a lot or not for these machines.  Anyway, 
>> last year it got to where it was throwing a low pressure error when you 
>> turn it on, then gives an oil drain error when doing a recovery.  
>> Several times it has ended up venting all of its stored R134 thru the 
>> vacuum vent line into the oil drain bottle.  I also suspect the ball 
>> valves on top of the internal tank are leaking. I am betting the low 
>> pressure error is the low pressure transducer.  I also tested the 
>> solenoids and they all appear to work so I am thinking the oil drain 
>> error could be the circuit board. When it is supposed to be doing an oil 
>> drain it never even opens the solenoid.
>> 
>> Called a local service place for these and if they come here its $250 
>> for the drive plus $180 for the diagnostic, or I can take it to Tulsa 
>> and just pay the $180, then pay whatever labor for the repairs plus 
>> parts.  Assuming it needs all 3 ball valves those are around $60 each.  
>> The transducer is around $150 to $180 depending on the website.  Circuit 
>> board is about $350.  So if it actually needs all this I would probably 
>> be looking at a grand to fix this machine. That does not factor in any 
>> additional labor.
>> 
>> I would always just order the transducer and see if that fixes the rest 
>> of the problems (which I am not hopeful of), or pay the $180 to see what 
>> is wrong and what it would cost to fix it.  I am however considering 
>> just buying a newer machine.  There is one exactly like mine but appears 
>> to have been used a lot less and includes a 30lb cylinder:
>> 
>> https://www.facebook.com/marketplace/item/5143233472435476/?ref=search&referral_code=marketplace_search&referral_story_type=post&tracking=browse_serp%3Adc0e9849-915e-40a4-b3d5-28817f9adfa7
>> 
>> Also looking at these:
>> 
>> https://www.facebook.com/marketplace/item/965256667454473?ref=search&referral_code=marketplace_search&referral_story_type=post&tracking=browse_serp%3Adc0e9849-915e-40a4-b3d5-28817f9adfa7
>> 
>> https://www.facebook.com/marketplace/item/274691608128011?ref=search&referral_code=marketplace_search&referral_story_type=post&tracking=browse_serp%3Adc0e9849-915e-40a4-b3d5-28817f9adfa7
>> 
>> https://www.facebook.com/marketplace/item/698606498164730/?ref=saved&referral_code=null
>> 
>> I know these are a lot of money but I actually do quite a bit of AC work 
>> for my own fleet of cars and projects.  Anybody have any thoughts on 
>> fixing mine or spending the money on a newer one?
>> 
>> _______________________________________
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> _______________________________________
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to