A face cord is a stack 4' high X 8' long by whatever length you ordered the
wood cut. Wood peddlers around here sell a face cord as a cord and a face
cord is usually an over filled pickup truck load. They will load the truck
from a pre-measured stack.

Also, a face cord normally sells for the same price as a cord because the
cost per stick to cut the wood is exactly the same.

At least around here, to get a true cord of wood you'd need to order your
wood cut into 4' lengths.

Thanks,
Tom Hargrave
www.kegkits.com
256-656-1924
 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Jim Cathey
Sent: Saturday, March 24, 2007 9:42 AM
To: Mercedes Discussion List
Subject: Re: [MBZ] OT: Wood Splitters

>>> A full pickup load is a cord.  Very roughly.

And by full, I mean FULL.  Mounded up above the roof height
in the center, all the way back.  The guys that deliver
commercially usually have plywood sides on the truck.  They
way to do that is to make a reference stack (or ten) then
load the truck.  Once you're used to how a full cord looks
in the truck then you dispense with the reference stacking.

>
> I believe that's what they call a "face cord" - it has the width and 
> height
> of a cord but not the depth.

A stack of single sticks of wood 4' high 8' long is a face cord.
Not a particularly useful measure for any commercial purpose.

> Might be in a full sized 3/4 ton pickup... 1/2 ton you can't go full
> height or you'll be draggin the rear end too low to get ...
> Dodge Dakota ... narrower ... 6' bed ... S10 ... 3 trips

I said pickup truck, not grocery getter!  :-)  My Dodge diesel
laughs at such paltry loads.  That pair of concrete barrier blocks
that weighed some 9000# it _did_ notice.

-- Jim


_______________________________________
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Reply via email to