Peter
The 603 uses stretch bolts. Buy new ones -- there are 17 of the, three
different lengths. I believe the instructions with the head gasket I
just did say torque to 15 ft/lbs, to 35 ft/lbs, then 90 degree turn,
wait ten minutes, another 90 degrees. No torque figures for the 90
degree turns, as it will vary and actually doesn't go up much.
- Re: [MBZ] torque wrench shopping Peter Frederick
- Re: [MBZ] torque wrench shopping LarryT
- Re: [MBZ] torque wrench shopping E M
- Re: [MBZ] torque wrench shopping John M McIntosh
- Re: [MBZ] torque wrench shopping Rich Thomas
- Re: [MBZ] torque wrench shopping Kevin Kraly