On Tue, 5 Jun 2007 22:27:00 -0600 Craig McCluskey <[EMAIL PROTECTED]>
wrote:
> I ended up making a lump beside the vertical 16ga galvanized with the
> 6013 and then changing to 3/32" 7014 and minimum current to join the
> galvanized to the lump.
That is, a lump made by several passes with the rod to build the bead up
above the flat 1/4" plate.
Question: When using a stick welder, does one need to clean the slag off
the bead before one runs another bead on top of it? Putting the
stick down, taking off the helmet, getting the angle grinder,
grinding off the slag, putting the helmet back on, picking up
the stick and finally running another bead takes awhile.
Thanks,
Craig
