If you all remember I discovered the reason my 92 has no boost is because it has a bad rack position sensor in the IP. Well today I pulled the pump off the car and was going to swap in the pump off the engine I am pulling out of another car that was running but not right. When I pulled the plug on the side of the pump I was going to install (the plug to insert the lock tool), very thin oil ran out, quite a bit. I then remember this was the engine that seemed to be getting diesel in the oil. So, I suspect this pump is not any good and really do not want to install it. So, now I do not have a spare 2.5 pump. I guess I am going to need to send my pump in and have the rack position sensor replaced. Anybody know anywhere that works on these pumps? Dont think I need a full rebuild but if it was not very expensive I might just go that route. -- Kaleb C. Striplin/Claremore, OK 94 E420, 92 300SD, 92 300D, 92 250D Turbo, 92 300E 4Matic, 91 300D, 90 420SEL, 89 560SEL, 89 260E, 87 300SDL, 85 380SE 5.0 Euro, 81 240D, 81 380SLC, 80 240D, 76 240D, 76 300D, 72 250C, 69 250 http://www.okiebenz.com
_______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com