I checked out the thermistor yesterday and found it to be good. The wire going from the sensor to the gauge was no good, as well as the sensor itself. I ran a new wire, as opposed to trying to find the break, and went to pull-a-part today where I bought 3 sensors. (as well as a BUNCH of other stuff)I will test them tonight, when my wife is not looking (need the pan on the stove with boiling water) and then install if good. The 3 I bought are all different so I need to compare to the one in the car. One is 100 to 107, one is 105 to 115 and one is 100 to 110. Results to follow.
Steve -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Frederick Sent: Thursday, December 27, 2007 8:53 PM To: Mercedes Discussion List Subject: Re: [MBZ] 1987 300D temp sending unit Guages are on the same fuse as the brake lights. Peter _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com