In a message dated 4/5/2008 8:17:40 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes:
Hell with it, I will probably just pull that back plate off and swap it. Kaleb, I think you need a special socket to pull the retaining nut for the 3 arm flex adapter off the trans. So have your spare part removed first so you see what you need. Instead, I would look for one of those permanent pipe repair clamps that would fit around the tail shaft. If you get a stainless steel one you could have a new mount welded to it, or perhaps bolt through it with a couple carriage bolts. Home Depot, or a plumbing specialist should have a clamp big enough. I would fix it to minimize stress on the tail shaft housing, which will break next. Jim Friesen Phoenix AZ 79 300SD, 264 K miles 98 ML 320, 155 K miles **************Planning your summer road trip? Check out AOL Travel Guides. (http://travel.aol.com/travel-guide/united-states?ncid=aoltrv00030000000016) _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
