Finally found one, they call it "o ring" which it isn't "cam shaft seal" which it also isn't...
The cross section I think was probably rectangular at some point, I'm 99.9% certain it wasn't an o ring, the hole it fits is NOT round. Anyway the new one should be here next week while I'm on vacation. It'll be a nice present to return to. $4. -Curt Date: Tue, 13 May 2008 17:46:16 -0500 From: Loren Faeth <[EMAIL PROTECTED]> Subject: Re: [MBZ] was diesel, now Motorcycles for Bob To: Mercedes Discussion List <mercedes@okiebenz.com> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="us-ascii"; format=flowed I think you are pointing to the black not quite round thing. I'd guess it used to be an oring. is the cross section more or less square? if so, pop it out and go get some orings about the right size and see what fits. It IS a metric oring, so mb or auto a/c orings might be a good place to start. The first time I changed the oil filter on an MB diesel the oil filter canister seal was square cross section, so I thought it was a special square gasket. What i didn't know then was that the oring does not spring back to round after time and heat. I have seen some former orings that you could never guess that it had been an oring. that was a long time ago, when I was 18 _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com