The cigar hose is designed to dampen the fuel pressure surges from the lift pump and smooth the flow of fuel back to the tank. It also keeps the steel line from drumming on the frame and driving you nuts.
The "whole assembly" of the hand pump simply screws on. I suspect you are missing the copper seal, or it didn't seat properly when installed. What's not to like about a pump that works when you need it and doesn't dump fuel oil all over you (and leak, usually instantly) when you unscrew it? Besides, you will have to install a used one, only the improved type (sealed with o-rings instead of a leather piston seal) is available new. Take it off (a crow-foot works best, at least on the W115 chassis, you may have more room) and replace the copper seal before tossing the pump. The "thumb" pumps rarely leak. Peter _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com