On Sun, Aug 4, 2013 at 8:38 AM, Joerg Boge <[email protected]> wrote: > I want to have static ip > > so i changed /etc/network/interfaces > > # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) > > # The loopback interface > auto lo > iface lo inet loopback > > # Wireless interfaces > iface wlan0 inet dhcp > wireless_mode managed > wireless_essid any > wpa-driver wext > wpa-conf /etc/wpa_supplicant.conf > > iface atml0 inet dhcp > > # Wired or wireless interfaces > auto eth0 > iface eth0 inet static > address 192.168.2.8 > netmask 255.255.255.0 > network 192.168.2.254 > gateway 192.168.2.1 > iface eth1 inet dhcp > > # Ethernet/RNDIS gadget (g_ether) > # ... or on host side, usbnet and random hwaddr > iface usb0 inet static > address 192.168.7.2 > netmask 255.255.255.0 > network 192.168.7.0 > gateway 192.168.7.1 > > # Bluetooth networking > iface bnep0 inet dhcp > > > > do ifdown eth0 > ifup eth0 > > and I can connect to static ip > > after reboot there is no connection to the static ip possible and a new > dynamic ip is taken via dhcp. > > i do ifdown and ifup again. now i can connect via ssh to static and the > dynamic ip. > > that is normal?
Yes and no. fsl-image-gui is using connman for network management so you need to set IP there. Please make your own image for specific needs as this one is not intended to be used for long time but just as testing/demo. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://projetos.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
