On Sun, Aug 4, 2013 at 6:10 PM, Joerg Boge <[email protected]> wrote: > On 08/04/2013 09:09 PM, Otavio Salvador wrote: >> >> On Sun, Aug 4, 2013 at 8:38 AM, Joerg Boge <[email protected]> wrote: >>> >>> I want to have static ip >>> >>> so i changed /etc/network/interfaces >>> >>> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) >>> >>> # The loopback interface >>> auto lo >>> iface lo inet loopback >>> >>> # Wireless interfaces >>> iface wlan0 inet dhcp >>> wireless_mode managed >>> wireless_essid any >>> wpa-driver wext >>> wpa-conf /etc/wpa_supplicant.conf >>> >>> iface atml0 inet dhcp >>> >>> # Wired or wireless interfaces >>> auto eth0 >>> iface eth0 inet static >>> address 192.168.2.8 >>> netmask 255.255.255.0 >>> network 192.168.2.254 >>> gateway 192.168.2.1 >>> iface eth1 inet dhcp >>> >>> # Ethernet/RNDIS gadget (g_ether) >>> # ... or on host side, usbnet and random hwaddr >>> iface usb0 inet static >>> address 192.168.7.2 >>> netmask 255.255.255.0 >>> network 192.168.7.0 >>> gateway 192.168.7.1 >>> >>> # Bluetooth networking >>> iface bnep0 inet dhcp >>> >>> >>> >>> do ifdown eth0 >>> ifup eth0 >>> >>> and I can connect to static ip >>> >>> after reboot there is no connection to the static ip possible and a >>> new >>> dynamic ip is taken via dhcp. >>> >>> i do ifdown and ifup again. now i can connect via ssh to static and the >>> dynamic ip. >>> >>> that is normal? >> >> Yes and no. >> >> fsl-image-gui is using connman for network management so you need to >> set IP there. Please make your own image for specific needs as this >> one is not intended to be used for long time but just as testing/demo. >> > > I goggled something out about connman. > > So to set up it with static ip "connman-tests" are needed > > so will be nice it will be added in the future
You can do it in the GUI AFAIK. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://projetos.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
