On 08/04/2013 04:45 PM, Joerg Boge wrote:
On 08/04/2013 09:09 PM, Otavio Salvador wrote:
On Sun, Aug 4, 2013 at 8:38 AM, Joerg Boge <[email protected]> wrote:
I want to have static ip
so i changed /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
auto lo
iface lo inet loopback
# Wireless interfaces
iface wlan0 inet dhcp
wireless_mode managed
wireless_essid any
wpa-driver wext
wpa-conf /etc/wpa_supplicant.conf
iface atml0 inet dhcp
# Wired or wireless interfaces
auto eth0
iface eth0 inet static
address 192.168.2.8
netmask 255.255.255.0
network 192.168.2.254
gateway 192.168.2.1
iface eth1 inet dhcp
# Ethernet/RNDIS gadget (g_ether)
# ... or on host side, usbnet and random hwaddr
iface usb0 inet static
address 192.168.7.2
netmask 255.255.255.0
network 192.168.7.0
gateway 192.168.7.1
# Bluetooth networking
iface bnep0 inet dhcp
do ifdown eth0
ifup eth0
and I can connect to static ip
after reboot there is no connection to the static ip possible and
a new
dynamic ip is taken via dhcp.
i do ifdown and ifup again. now i can connect via ssh to static and the
dynamic ip.
that is normal?
Yes and no.
fsl-image-gui is using connman for network management so you need to
set IP there. Please make your own image for specific needs as this
one is not intended to be used for long time but just as testing/demo.
I waiting for Task #10 - How to create a custom layer from Yocto
Training Home ;)
I'm baking it right now :D
If you have other topic idea, please, let me know
--
Daiane
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
