I'm starting at x0 y0 . -----Original Message----- From: Lauzus, Frederick <[EMAIL PROTECTED]>for the circ. int.
To: Colin Williams <[EMAIL PROTECTED]>; Smartcam Forum <[EMAIL PROTECTED]> Date: Friday, June 23, 2000 1:54 PM Subject: RE: >What was the "Y" coordinate output prior to the "J"? > > >============================================= > Fred Lauzus, CAM Programming Coordinator > High Steel Structures, Incorporated > mailto:[EMAIL PROTECTED] http://www.highsteel.com >============================================= > > >-----Original Message----- >From: Colin Williams [mailto:[EMAIL PROTECTED]] >Sent: Friday, June 23, 2000 1:21 PM >To: Smartcam Forum >Subject: > > >1st. >THIS IS WHAT I WANT: > >N15 G01 Z-0.047 F8.0 >N16 G42 D16 X0.283 >N17 G02 I-0.283 >N18 G01 G40 D16 X0.0 >N19 G00 Z0.1 > > >2nd. >THIS IS WHAT I AM GETTING: > >N40 G01 Z-0.047 F8.0 >N41 G42 D16 X0.283 >N42 G02 I-0.283 J-0.38 >N43 G01 G40 D16 X0.0 >N44 G00 Z0.1 > >In the first example the tool previous is hidden in the process model. > >In the second example the tool previous is not hidden in the process model. >The only difference is the "J" value in the second example. I do not want >the "J" value. I don't know where the "J" is coming from. > >I've never had this before. > >Thank You > >Colin Williams > > > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
