[mfg-smartcam] RE:

[Joe Geraci]

Colin,   Check your smf file, question 60, it is probably set to "0", change it to "1"   J.G. -----Original Message----- From: Colin Williams [mailto:[EMAIL PROTECTED]] Sent: Friday, June 23, 2000 2:59 PM To: Joe Geraci Subject: Re: not needed     -----Original Message----- From: Joe Geraci <[EMAIL PROTECTED]> To: 'Colin Williams' <[EMAIL PROTECTED]>; 'Smartcam' (E-mail) <[EMAIL PROTECTED]> Date: Friday, June 23, 2000 2:34 PM Subject: RE: Just out of curiosity, is the number wrong or not needed ?   J.G. -----Original Message----- From: Colin Williams [mailto:[EMAIL PROTECTED]] Sent: Friday, June 23, 2000 1:21 PM To: Smartcam Forum Subject: 1st. THIS IS WHAT I WANT:   N15 G01 Z-0.047 F8.0 N16 G42 D16 X0.283 N17 G02 I-0.283 N18 G01 G40 D16 X0.0 N19 G00 Z0.1     2nd. THIS IS WHAT I AM GETTING:   N40 G01 Z-0.047 F8.0 N41 G42 D16 X0.283 N42 G02 I-0.283 J-0.38 N43 G01 G40 D16 X0.0 N44 G00 Z0.1   In the first example the tool previous is hidden in the process model.   In the second example the tool previous is not hidden in the process model. The only difference is the "J" value in the second example. I do not want the "J" value. I don't know where the "J" is coming from.   I've never had this before.   Thank You   Colin Williams