On 19-Jun-00, Fred Wright wrote:
>> --- 192.168.0.2 ping statistics ---
>> 45 packets transmitted, 0 packets received, 100% packet loss
>
> This means that there is no route to the destination, which usually
> indicates ARP trouble. Start from offline in MiamiDx and a fresh
> boot of the PC, and do the ping with MiamiTCPDump running in another
> window.
What means ARP?
miamitcpdump: listening on eth0
00:07:39.940000 192.168.1.2.netbios-dgm > 192.168.1.255.netbios-dgm: udp 180
00:07:39.940003 192.168.1.2.netbios-dgm > 192.168.1.255.netbios-dgm: udp 180
00:07:40.000001 192.168.1.2.netbios-dgm > 192.168.1.255.netbios-dgm: udp 209
00:07:40.500001 arp who-has 192.168.1.2 tell 192.168.1.1 (52:54:40:26:79:ca)
00:07:45.560002 arp who-has 192.168.1.2 tell 192.168.1.1 (52:54:40:26:79:ca)
00:07:50.620002 arp who-has 192.168.1.2 tell 192.168.1.1 (52:54:40:26:79:ca)
00:07:55.020001 192.168.1.2.netbios-dgm > 192.168.1.255.netbios-dgm: udp 210
00:07:55.660002 arp who-has 192.168.1.2 tell 192.168.1.1 (52:54:40:26:79:ca)
00:08:00.720002 arp who-has 192.168.1.2 tell 192.168.1.1 (52:54:40:26:79:ca)
00:08:25.040002 192.168.1.2.netbios-dgm > 192.168.1.255.netbios-dgm: udp 209
After a ctrl-c I get:
miamitcpdump: MiamiPCapLoop: read error from BPF
10 packets received by filter
0 packets dropped by kernel
meanwhile a Miami-window opens:
20.06.00 00:08:16 MiamiDx-INetD Too many requests for netbios-ns/udp.
Temporarily shutting down socket.
20.06.00 00:08:46 MiamiDx-INetD Socket for netbios-ns/udp restored.
>> I setup an Ethernet-Interface in MiamiDX with the
>> z2-dp8390.mni-driver, option MEDIA=AUTO.
>> IP-Adress 192.168.0.1 (Amiga)
>> 192.168.0.2 (win95)
>
> Umm, where are you putting the second IP? Except for a definition in
> Hosts, you don't need to predefine the PC's IP, and I'd get numeric
> pings to work before messing with Hosts.
The second IP is defined on PC-side. Sorry, this was a bit confusing!
>> Subnet-mask 255.255.255.0
>> Gateway 192.168.0.2
>
> Is the PC really supposed to be a gateway to somewhere? If not, this
> is incorrect. In any case, it's unneeded for local pings.
hm, I addded the 192.168.0.2 in Miami as Gateway and the PC has the ID
192.168.0.2
>> The LEDs for the Amiga-port and the win95-port are on at the hub.
>> On the windows-side I created a TCP/IP -> 10 M Ethernet PCI-Adapter
>> interface for Microsoft Network-Clients with File- and
>> Printersharing. WINS deactivated
>> Installed gateways 192.168.0.1
>
> Again, you should only add the Amiga as a gateway if it's really
> going to be a gateway to somewhere, and in any case it's not needed
> for local pings.
>
>> 192.168.0.2
>
> Huh? You're making the machine a gateway to itself? And trusting
> Windoze not to get confused by that?
I don�t understand that one. I made the Amiga as a gateway by
inserting the 192.168.0.2 in the gatewayfield in the interface.
>> Binds Client for Microsoft-Networks
>> File- and Printer for Microsoft-Networks
>
> If you plan to connect the PC to the net without a firewall, be
> *very* careful about enabling Microsoft Networking, especially the
> server side. Unless you plan to use Samba, you're better off leaving
> Microsoft Networking disabled, since the PC will boot faster and
> have fewer security holes that way.
Yes, I understand that. But disabling Microsoft-Networking would not
allow file-sharing, would it?
> The LEDs will tell you which machine is sending, which should be
> both in the case of a successful ping. But MiamiTCPDump will tell
> you more.
>
> You might also try using 192.168.1 addresses instead of 192.168.0,
> since Holger indicated that some Microsoft software doesn't like
> 192.168.0.
Yes, you see above. i have changed them to 192.168.1.1 and 192.168.1.2
but with the same results.
>> I just experienced that when the ethernet-interface is online, I
>> cannot connect to my ISP....
>
> On which machine?
on the Amiga. I get errors with Yam that my ISP is not available.
Also downloading a file with Voyager fails when the ethernet is
online.
Going offline with the ethernet-interface and then online with ppp0
works then.
Regards
--
Andreas Meyer
--
http://home.wtal.de/MeineHomepage/
--
--
To unsubscribe send "unsubscribe miami-talk-ml" to
"[EMAIL PROTECTED]". For help on list commands send "help" to
"[EMAIL PROTECTED]".
