Dear Fred Wright,
thank you very much for your hints.
I do not use MCP and tried the native serial port, which
works up the dialling of the telefon number of the
provider: here I am getting the message "No Dial Tone".
Telekon cabling is correct and dial tone is at the entry to
the Zyxel.
Do you know of a terminal program running under
OS 3.5 which I can download to test the modem settings?
Or do you know what i can do to solve this problem?
Best regards,
Henrik Luethje
On Fri, 28 Jul 2000 Fred Wright wrote:
>On Mon, 24 Jul 2000, Henrik Luethje wrote:
>
>> I am constantly getting the Miami-Message:
>>
>> Software error
>> Miami Airport
>> Program Error (Number 80000004)
>
>If you mean this literally, then you must have something installed that's
>providing that format of report. If you're using MCP, beware that it's
>notorious for conflicts.
>
>> I have the following configuration:
>> Amiga 3000 with 060-processor, OS 3.5,
>> MultiFaceCard III, Zyxel 2864.
>>
>> I checked the physical connections, they seem to be allright,
>> usage of snoop-DOS showed as last action (before the above error message
>> appeared):
>> Findsem NSDPatchsemaphore Fail
>>
>> Can somebody give me a hint or provide me with an appropriate set of
>> Modem-commands for my configuration, since I am not sure whether I configured
>> the connection correctly.
>
>Wrong modem commands shouldn't cause a crash. Have you tried the native
>serial port? Perhaps there's a problem with the MFC-III driver.
>
> Fred Wright
>
>--
>
>To unsubscribe send "unsubscribe miami-talk-ml" to
>"[EMAIL PROTECTED]". For help on list commands send "help" to
>"[EMAIL PROTECTED]".
--
_______________________
Henrik Luethje
Eggstrasse 33
4433 Ramlinsburg
Switzerland
T: ++41 61 931 2063
E-Mail: [EMAIL PROTECTED]
_______________________
--
To unsubscribe send "unsubscribe miami-talk-ml" to
"[EMAIL PROTECTED]". For help on list commands send "help" to
"[EMAIL PROTECTED]".
