So,

After talking with Bill C (what a phenomenal asset to this list and the 
community!) I decided to go with swapping the head gasket. While I'm in 
there I'll be doing the other large maintenance items. The list includes:

Head Gasket & associated top end gaskets (minus intake/exhaust, to be 
reused)
Water pump and associated gaskets
Timing Belt and associated bits (pulleys, etc.)
Front Main Seal
Cooling system flush (Zerex radiator super-flush)
Oil/Filter

Basically it's a whole top and front end refresh on a 1990 1.6L LWSC 
(VIN is in the 4000's somewhere) with the exception of the 
intake/exhaust gaskets and the valve seals. I will be working outside in 
a grassy gravel drive that is not level - the car will be on ramps 
rather than stands for safety reasons. I will lay out a tarp to catch 
the stray nut/bolt so they don't get lost in the rocks. I'm doing this 
redneck style! I even have a six pack of beer on standby.

My question is thus:

What is the best order to tackle this in?

Obviously the cooling system is last. I am wondering things like - do I 
break the front pulley bolt before I remove the head and replace the 
front main seal before the head gasket, or do I reassemble the head and 
do the main later? Do I do the water pump on the way in or the way out? 
What (when) about the timing belt idler and tensioner?

As a side note - I was planning on pulling the radiator (it'll be empty 
anyway) and remove the hood to do the work. Is this overkill or a good 
idea?
FWIW - This will be my first time this deep into an engine. Conceptually 
I've got the process nailed down. I am generally mechanically inclined 
and technically savvy. I can read and write and set a torque wrench. 
Here's some things I don't know - are the head bolts deep well or 
standard sized sockets? Will I figure out a way to break the front 
pulley bolt? Can I get the front main out without gouging the crap out 
of the surfaces?

I can follow instructions and can usually extrapolate missing/incomplete 
information..
Speaking of which, I also ordered a signed copy of "Mazda Miata MX5, 
Performance Projects" by some guy named Keith Tanner. Being a 
tear-down/rebuild newbie it'll be a good playtest.

Sorry for the novel of an email. I do plan on some photos and a blog of 
my journey - I'll post links when I get it started.

Thanks in advance for answering the above - and thanks in advance for 
the panicked help I am about to ask for...

Brad
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to