Brad,
I recommend getting Keith Tanners book: Mazda Miata MX- 5 Performance Projects. It will help visualize and plan the projects. http://tinyurl.com/45u29m Luis -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brad Franks Sent: Wednesday, May 14, 2008 9:32 PM To: [email protected] Subject: Head gasket et. al. - the order of things? So, After talking with Bill C (what a phenomenal asset to this list and the community!) I decided to go with swapping the head gasket. While I'm in there I'll be doing the other large maintenance items. The list includes: Head Gasket & associated top end gaskets (minus intake/exhaust, to be reused) Water pump and associated gaskets Timing Belt and associated bits (pulleys, etc.) Front Main Seal Cooling system flush (Zerex radiator super-flush) Oil/Filter Basically it's a whole top and front end refresh on a 1990 1.6L LWSC (VIN is in the 4000's somewhere) with the exception of the intake/exhaust gaskets and the valve seals. I will be working outside in a grassy gravel drive that is not level - the car will be on ramps rather than stands for safety reasons. I will lay out a tarp to catch the stray nut/bolt so they don't get lost in the rocks. I'm doing this redneck style! I even have a six pack of beer on standby. My question is thus: What is the best order to tackle this in? Obviously the cooling system is last. I am wondering things like - do I break the front pulley bolt before I remove the head and replace the front main seal before the head gasket, or do I reassemble the head and do the main later? Do I do the water pump on the way in or the way out? What (when) about the timing belt idler and tensioner? As a side note - I was planning on pulling the radiator (it'll be empty anyway) and remove the hood to do the work. Is this overkill or a good idea? FWIW - This will be my first time this deep into an engine. Conceptually I've got the process nailed down. I am generally mechanically inclined and technically savvy. I can read and write and set a torque wrench. Here's some things I don't know - are the head bolts deep well or standard sized sockets? Will I figure out a way to break the front pulley bolt? Can I get the front main out without gouging the crap out of the surfaces? I can follow instructions and can usually extrapolate missing/incomplete information.. Speaking of which, I also ordered a signed copy of "Mazda Miata MX5, Performance Projects" by some guy named Keith Tanner. Being a tear-down/rebuild newbie it'll be a good playtest. Sorry for the novel of an email. I do plan on some photos and a blog of my journey - I'll post links when I get it started. Thanks in advance for answering the above - and thanks in advance for the panicked help I am about to ask for... Brad _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
