Yes....I have checked. No leak. Purged the line using a vacuum draw and even bled @ the master cyl.
The car is on jack stands and if I put it in 1st cluch in and hold the brakes the engine lugs down but it doesn't stall.....it did before I bled it. Eric -----Original Message----- From: [email protected] Sent: Wednesday, March 24, 2010 2:15 PM To: [email protected] Subject: Re: Clutch not fully releasing...ACT 1.8 Happy Meal setup... You say the clutch isn't fully releasing, meaning the gears seem to be engaged when the clutch is fully depressed. Are you absolutely certain that you DON'T have a fluid leak, either at the back of the master into the car, or down at the slave? In a message dated 3/24/2010 2:06:59 P.M. Eastern Daylight Time, [email protected] writes: My 91 just out of the blue stopped releasing. I bled the system and no fix. The master and slave were replaced last spring and seem to be still working. There is no odd noise coming from the clutch area. I tried pushing the clutch fork farther back with a pry bar and it wouldn't go any farther. I am running out of options before having to yank the trans..... Eric=
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
