And plug the vent hole or your going to lose fluid. Make a new one as well.
On 4/6/10, Chris Yee <[email protected]> wrote: > Flip the differential upside down. you would have to rework the mount > points of the differential for clearance. > > fast G wrote: >> Can you re-build a Miata diff to run backwards? I am starting to plan >> the building of a motorcycle engined Locost 7 style vehicle. The >> common option is to use a Hyabusa/R1 engine mounted north and south, >> running a prop drive flange where the gearbox sprocket should go. I am >> thinking an option is an already shaft drive engine V-max, FJR1400 and >> the like. This could be a more torquey engine with a wider ration >> gearbox. One problem I have been told that the bike shaft drive runs >> backwards compared to a car. So I would end up with 6 reverse gears, >> bike engined cars have a issue with doing backwards, but this is not >> the solution:) So the question is can you swap the crown wheel over in >> a Miata? >> >> Thanks >> >> Graham >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Miatapower mailing list >> [email protected] >> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower >> > > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
