SR2, AR5213 based card.
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
[EMAIL PROTECTED]
Josh Luthman wrote:
Can you tell us what wireless card you're using?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly.
--- Henry Spencer
On Tue, Nov 25, 2008 at 4:50 PM, Chris Gotstein <[EMAIL PROTECTED]> wrote:
Firmware is up-to-date and tracking was disabled. Doesn't seem to be a
memory or CPU problem as the CPU is only at 12% and half the memory is free.
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
[EMAIL PROTECTED]
Kevin Neal wrote:
Have you disabled connection tracking?
/ip firewall connection tracking set enabled=no
Have you also upgraded the firmware version? You can check by going to
/system routerboard print. If 3.16 has a newer firmware version typing in
upgrade and then yes then rebooting will upgraded it.
I also disable any packages that aren't in use:
/system package disable dhcp
/system package disable hotspot
/system package disable ipv6
/system package disable mpls
/system package disable ppp
/system package disable routing
-Kevin
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chris Gotstein
Sent: Tuesday, November 25, 2008 2:41 PM
To: [EMAIL PROTECTED]; Mikrotik discussions
Subject: [Mikrotik] RB532 AP Issues
I have a RB532, running 3.16, as a 2.4 AP serving about 35 clients. We
had
switched from a Tranzeo 6600 as when the traffic increased on the tranzeo,
performance dropped off. I'm seeing the same problem now with the RB532.
When the unit starts passing over 2mb or 3mb of data, the whole system
slows
down. I'm sitting on it now and my ping times are around 500ms and i'm
only
getting 150k speeds. The RB532 is acting just as an AP-Bridge, no
routing,
no packet shaping. The shaping is done on a different box further up the
line. Anything i can do to improve performance?
--
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
[EMAIL PROTECTED]
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.butchevans.com/pipermail/mikrotik/attachments/20081125/674aac07/attachment.html>
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
