I would run the "packet sniffer" for about 1 second and look at the packets
- - Sounds like IPVD (Venereal Disease) may the problem- -hehehe Mac > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:mikrotik- > [EMAIL PROTECTED] On Behalf Of Chris Gotstein > Sent: Tuesday, November 25, 2008 3:51 PM > To: Mikrotik discussions > Subject: Re: [Mikrotik] RB532 AP Issues > > Firmware is up-to-date and tracking was disabled. Doesn't seem to be a > memory or CPU problem as the CPU is only at 12% and half the memory is > free. > > Chris Gotstein > Sr Network Engineer > UP Logon/Computer Connection UP > 500 N Stephenson Ave > Iron Mountain, MI 49801 > Phone: 906-774-4847 > Fax: 906-774-0335 > [EMAIL PROTECTED] > > Kevin Neal wrote: > > Have you disabled connection tracking? > > /ip firewall connection tracking set enabled=no > > > > Have you also upgraded the firmware version? You can check by going > to > > /system routerboard print. If 3.16 has a newer firmware version > typing in > > upgrade and then yes then rebooting will upgraded it. > > > > I also disable any packages that aren't in use: > > /system package disable dhcp > > /system package disable hotspot > > /system package disable ipv6 > > /system package disable mpls > > /system package disable ppp > > /system package disable routing > > > > > > -Kevin > > > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Chris > Gotstein > > Sent: Tuesday, November 25, 2008 2:41 PM > > To: [EMAIL PROTECTED]; Mikrotik discussions > > Subject: [Mikrotik] RB532 AP Issues > > > > I have a RB532, running 3.16, as a 2.4 AP serving about 35 clients. > We had > > switched from a Tranzeo 6600 as when the traffic increased on the > tranzeo, > > performance dropped off. I'm seeing the same problem now with the > RB532. > > When the unit starts passing over 2mb or 3mb of data, the whole > system slows > > down. I'm sitting on it now and my ping times are around 500ms and > i'm only > > getting 150k speeds. The RB532 is acting just as an AP-Bridge, no > routing, > > no packet shaping. The shaping is done on a different box further up > the > > line. Anything i can do to improve performance? > > > > -- > > Chris Gotstein > > Sr Network Engineer > > UP Logon/Computer Connection UP > > 500 N Stephenson Ave > > Iron Mountain, MI 49801 > > Phone: 906-774-4847 > > Fax: 906-774-0335 > > [EMAIL PROTECTED] > > _______________________________________________ > > Mikrotik mailing list > > Mikrotik@mail.butchevans.com > > http://www.butchevans.com/mailman/listinfo/mikrotik > > > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > > > > _______________________________________________ > > Mikrotik mailing list > > Mikrotik@mail.butchevans.com > > http://www.butchevans.com/mailman/listinfo/mikrotik > > > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > _______________________________________________ > Mikrotik mailing list > Mikrotik@mail.butchevans.com > http://www.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > No virus found in this incoming message. > Checked by AVG - http://www.avg.com > Version: 8.0.175 / Virus Database: 270.9.9/1806 - Release Date: > 11/25/2008 8:29 AM _______________________________________________ Mikrotik mailing list Mikrotik@mail.butchevans.com http://www.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
