Do the reset.
Open a terminal window.
Open the file in an editor on you PC.
Copy some lines from the PC and paste into the terminal window.
When you get an error, you know which line is failing and can fix it.

If you post the whole file, someone can probably find the bad line.

On 11/9/2012 3:08 PM, Jerry Roy wrote:
I attempted to use flashfig to test if the .rsc file I created would be
imported. It does but with issues. Only problem is it still does not get
entire config. I export a file called fullconfig.rsc that has all my
settings and then I reset router back to what it came with from "factory"
(Lan 192.168.88.0/24, Nat and dhcp client on Wan). I run netinstall,
flashfig and select my file. Pull the power and plug ethernet cable into
port 1. Plug in power and it says "flashfigged". I go and look at the
settings and NTP is missing, snmp is missing. I am not sure all of the
settings that are not re-applied.

Is the order of the commands what is causing portions to not be imported?
Does anyone have a document that explains what the best order the commands
should be in?

Any other Ideas?

*Jerry Roy*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://www.butchevans.com/pipermail/mikrotik/attachments/20121109/2108755d/attachment.html>
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2793 / Virus Database: 2624/5883 - Release Date: 11/08/12



--
Scott Reed
Owner
NewWays Networking, LLC
Wireless Networking
Network Design, Installation and Administration

Mikrotik Advanced Certified
www.nwwnet.net
(765) 855-1060
(765) 439-4253
(855) 231-6239


_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS

Reply via email to