Hi! ubsec0 at pci5 dev 0 function 0 "Broadcom 5862" rev 0x01: 3DES MD5 SHA1 AES PK, apic 9 int 0 (irq 10)
Joosep On Wed, May 18, 2011 at 8:56 PM, Maxim Bourmistrov <m...@alumni.chalmers.se>wrote: > How does it look in dmesg for this card? > > Sent from my iPhone > > On May 18, 2011, at 10:42, Joosep <joos...@gmail.com> wrote: > > > On Wed, May 18, 2011 at 10:06 AM, Patrick Oeschger < > > patrick.oesch...@bluewin.ch> wrote: > > > >> thank you for your input > >> why 'only' 400mbit? > >> the specs say 2gbit for BCM5862 in a pci-e 4x slot... > >> sounds like quite some overhead writing/ getting packets to/from the > card - > >> i would have expected it higher but i do not want to question your tests > >> *hmmm* > >> > >> Sent from Pat's iPhone > >> > > > > Hi! > > > > There is of course a possibility, that the test doesn't simulate reality > in > > the best way. > > The specs say 2gbit, but when doing 400mbps there isn't much power left > on > > machines main cpu (10% idle). > > So i guess the limiting factor here is main cpu not the CA card. > > I have done the same tests with 1,8 GHz opteron and in that case the > result > > was around 270mbps. > > > > Joosep