Hi.
I'm trying to deploy a slave nameserver on a laptop to sit at somebodies home.
It runs NSD and other than salving and serving queries it polls an NTP
server and that's it. It doesn't run X11 ...
Functionally it all works and I'm looking at keeping this thing quiet
and dark so it's cheap and un-annoying.
I have apmd_flags="-C" which according to apm is doing its job.
The fan kicks in every now and then for a second or so but it's not too bad.
I've set the options in wsconsctl.conf to blank the screen which also
works but this thing has I think what's called "a backlight" which
means the screen constantly glows. I'm planning to go set this thing
up, let the screen blank and close the lid.
I'd like to remove the backlight and the eerie glow.
I'm unfamiliar with laptops but I've tried zzz and apm -S both kill
the backlight which is great but network functions cease, yes I did
not know that.
I also can't seem to bring it back up form either state short of a
power cycle but that's moot.
Is there a way to turn off the backlight?
Is there anything else I can do to sedate this machine?
TIA
apm -Pv
Performance adjustment mode: cool running (192 MHz)
OpenBSD 5.1 (GENERIC) #160: Sun Feb 12 09:46:33 MST 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.60GHz ("GenuineIntel"
686-class) 1.61 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,NXE
real mem = 769912832 (734MB)
avail mem = 747220992 (712MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/05/06, BIOS32 rev. 0 @
0xfd450, SMBIOS rev. 2.34 @ 0xdf810 (38 entries)
bios0: vendor TOSHIBA version "V1.20" date 06/05/2006
bios0: TOSHIBA Satellite L30
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SSDT SSDT
acpi0: wakeup devices PB2_(S4) OHC1(S3) OHC2(S3) EHCI(S3) P2P_(S5)
LANC(S5) AUDO(S3) MODM(S3) AZLA(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-13
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB2_)
acpiprt2 at acpi0: bus -1 (PB3_)
acpiprt3 at acpi0: bus -1 (PB4_)
acpiprt4 at acpi0: bus 9 (P2P_)
acpiprt5 at acpi0: bus 1 (AGP_)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1
acpitz0 at acpi0: critical temperature is 110 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 not present
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xd000 0xcd000/0x1000 0xdf800/0x800! 0xe0000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ATI RS400 Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200M" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 18 function 0 "ATI SB400 SATA" rev 0x80: DMA
pciide0: using apic 1 int 22 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <HTS541060G9SA00>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 5
ohci0 at pci0 dev 19 function 0 "ATI SB400 USB" rev 0x80: apic 1 int
19, version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB400 USB" rev 0x80: apic 1 int
19, version 1.0, legacy support
ehci0 at pci0 dev 19 function 2 "ATI SB400 USB2" rev 0x80: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SB400 SMBus" rev 0x81: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x52: 256MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
spdmem1 at iic0 addr 0x53: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
pciide1 at pci0 dev 20 function 1 "ATI SB400 IDE" rev 0x80: DMA,
channel 0 wired to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-T20L, NR02> ATAPI
5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
azalia0 at pci0 dev 20 function 2 "ATI SB450 HD Audio" rev 0x01: apic 1 int 16
azalia0: codecs: Realtek ALC861, AT&T/Lucent/0x1040, 0x0000/0x0000,
using Realtek ALC861
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB400 ISA" rev 0x80
ppb1 at pci0 dev 20 function 4 "ATI SB400 PCI" rev 0x80
pci2 at ppb1 bus 9
rl0 at pci2 dev 2 function 0 "Realtek 8139" rev 0x10: apic 1 int 21,
address 00:16:36:54:f0:ec
rlphy0 at rl0 phy 0: RTL internal PHY
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (8a67950191d2208c.a) swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
WARNING: R/W mount of /data denied. Filesystem is not clean - run fsck
WARNING: R/W mount of /data denied. Filesystem is not clean - run fsck
umass0 at uhub0 port 3 configuration 1 interface 0 "Kingston
DataTraveler G2" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd0 at scsibus3 targ 1 lun 0: <Kingston, DataTraveler G2, 1.00> SCSI2
0/direct removable serial.09511624F051B9221274
sd0: 3689MB, 512 bytes/sector, 7555528 sectors
