The com port speed may be changed in the bios menu.
On Fri, Nov 29, 2013 at 7:24 AM, Aviolat Romain <romain.avio...@nagra.com>wrote: > Hi Aurelien, > > I've got same boards at work, I saw no problems installing obsd on top of > them. Few steps I always follow: > > 1. In pxe boot.conf file: > > sty com0 38400 > set tty com0 > boot tftp:/bsd54.rd > > 2. start DHCP server + tftp on my laptop > > 3. hit n during the RAM test to boot in PXE mode > > 4. install with default settings > > AFAIK the default serial port speed is 38400 not 57600 > > Romain > > -----Original Message----- > From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of > Aurelien Martin > Sent: vendredi 29 novembre 2013 13:10 > To: misc@openbsd.org > Subject: alix2d3 "entry point at 0x200120" after PXE installation > > Hi all, > > I installed openbsd-54 on a flash card on my alix2d3 board through PXE > with a nullmodem cable. > But after the installation, the machine reboot in loop after the message > "entry point at 0x200120" > > I tried all the solution found in google, set the tty to com0, and also > boot on wd0a instead of hd0a > > set tty com0 > stty com0 57600 > boot wd0a:/bsd > > But nothing change. > To simplify the debug reinstall the machine with the default mbr and > partitioning shema, and unfortunatly it change nothing. I choose to use > com0 during the installation > > Have you got tips or procedure to follow ? > I can provide logs that you need > > Thanks by advance > > Cheers, > Aurelien > > -- --------------------------------------------------------------------------------------------------------------------- () ascii ribbon campaign - against html e-mail /\
