Some off-list questions reminded me that I never followed up properly on
this one. The machine is now in service and runs cooler and quieter than
the aging (P4) Fujitsu-Siemens it replaced.
My only complaint is that due to the maze of twisty nonsense that is the
HPE web site I never got the BIOS upgrade, but it doesn't seem to matter
much in our context. The machine runs well, and I upgraded it to the
latest snapshot just over half an hour ago.
dmesg:
OpenBSD 6.0-current (GENERIC.MP) #1: Fri Dec 2 00:32:07 MST 2016
bu...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Celeron(R) CPU G1610T @ 2.30GHz ("GenuineIntel"
686-class) 2.30 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,XSAVE,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
real mem = 4057341952 (3869MB)
avail mem = 3966910464 (3783MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev.
2.7 @ 0xf3bdb000 (64 entries)
bios0: vendor HP version "J06" date 07/16/2015
bios0: HP ProLiant MicroServer Gen8
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SPCR MCFG HPET FFFF SPMI ERST APIC FFFF BERT
HEST FFFF FFFF SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices PCI0(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf4000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU G1610T @ 2.30GHz ("GenuineIntel"
686-class) 2.30 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,DEADLINE,XSAVE,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 13 (IPT1)
acpiprt1 at acpi0: bus -1 (IPT2)
acpiprt2 at acpi0: bus -1 (IPT3)
acpiprt3 at acpi0: bus -1 (IPT4)
acpiprt4 at acpi0: bus 3 (IPT5)
acpiprt5 at acpi0: bus -1 (IPT6)
acpiprt6 at acpi0: bus 4 (IPT7)
acpiprt7 at acpi0: bus 1 (IPT8)
acpiprt8 at acpi0: bus 7 (PT02)
acpiprt9 at acpi0: bus -1 (PT03)
acpiprt10 at acpi0: bus 2 (PT05)
acpiprt11 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C2(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu1 at acpi0: C2(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpitz0 at acpi0: critical temperature is 31 degC
"IPI0001" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"ACPI000D" at acpi0 not configured
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000!
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 3G PCIE" rev 0x09: apic 8 int 16
pci1 at ppb0 bus 7
ppb1 at pci0 dev 6 function 0 "Intel Core 3G PCIE" rev 0x09: apic 8 int 16
pci2 at ppb1 bus 2
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 8 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb2 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5
pci3 at ppb2 bus 13
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb5
pci4 at ppb3 bus 3
bge0 at pci4 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0
(0x5720000), APE firmware NCSI 1.3.7.0: msi, address 70:10:6f:3e:df:d4
brgphy0 at bge0 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0
bge1 at pci4 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0
(0x5720000), APE firmware NCSI 1.3.7.0: msi, address 70:10:6f:3e:df:d5
brgphy1 at bge1 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb5
pci5 at ppb4 bus 4
xhci0 at pci5 dev 0 function 0 "Renesas uPD720201 xHCI" rev 0x03: msi
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Renesas xHCI root hub" rev
3.00/1.00 addr 1
ppb5 at pci0 dev 28 function 7 "Intel 6 Series PCIE" rev 0xb5
pci6 at ppb5 bus 1
"Hewlett-Packard iLO3 Slave" rev 0x05 at pci6 dev 0 function 0 not
configured
vga1 at pci6 dev 0 function 1 "Matrox MGA G200eH" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Hewlett-Packard iLO3 Management" rev 0x05 at pci6 dev 0 function 2 not
configured
uhci0 at pci6 dev 0 function 4 "Hewlett-Packard USB" rev 0x02: apic 8 int 16
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Hewlett-Packard UHCI root
hub" rev 1.00/1.00 addr 1
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 8 int 20
usb3 at ehci1: USB revision 2.0
uhub3 at usb3 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci7 at ppb6 bus 20
pcib0 at pci0 dev 31 function 0 "Intel C204 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SV300S3, 521A> SCSI3
0/direct fixed naa.50026b723c0911e3
sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD10JPVX-22J, 01.0> SCSI3
0/direct fixed naa.50014ee6af2b4ed3
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
isa0 at pcib0
isadma0 at isa0
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vmm0 at mainbus0: VMX/EPT
uhub4 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub4 port 5 configuration 1 interface 0 "Microsoft Wired
Keyboard 600" rev 2.00/3.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 5 configuration 1 interface 1 "Microsoft Wired
Keyboard 600" rev 2.00/3.00 addr 3
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhub5 at uhub3 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhub6 at uhub5 port 3 configuration 1 interface 0 "Standard Microsystems
product 0x2660" rev 2.00/8.01 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
