Hi,
thanks for testing and for these hints. You are not the first
one who thinks that scrolling is a bit slow. I will consider
increasing the default speed, but such a change would need some
checks because the speed is not uniform on different touchpads -
which is due to the fact that many models don't provide (reliable)
resolution values.
As to the initial delay before scrolling starts, I believe I can
do something about it - when I have time for that ;-)
There is no plan to add "coasting" to the features of the driver
("coasting" means that scrolling continues after the fingers have
been lifted). I made a somewhat sketchy implementation in a
prototype, but I have the impression that it is not very popular
and not as essential as some other things.
On 08/09/2017 01:01 PM, Marcus MERIGHI wrote:
> Hello,
>
> just as Josh I have a X220 which works fine, thanks!
>
> notes: two-finger-scrolling has changed; it takes a little more to
> start scrolling; it scrolls a little slower; it stops scrolling
> instantly when I lift my fingers (formerly, if I scrolled with a swing
> and then released the touchpad it kept scrolling and slowed down slowly,
> unless I tapped the touchpad).
>
> Former synclient settings:
>
> syndaemon -i 0.75 -t -K -d -R
> synclient TapButton1=1
>
> I like tapping, so I enabled it (mouse.tp.tapping=1).
>
> Thanks, Marcus
>
> wsconsctl:
>
> mouse.type=synaptics
> mouse.rawmode=0
> mouse.scale=1472,5472,1408,4448,0,75,129
> mouse.tp.tapping=1
> mouse.tp.scaling=0.183
> mouse.tp.swapsides=0
> mouse.tp.disable=0
> mouse1.type=ps2
>
> dmesg:
>
> OpenBSD 6.1-current (GENERIC.MP) #49: Mon Aug 7 22:06:26 MDT 2017
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> RTC BIOS diagnostic error 80<clock_battery>
> real mem = 4156157952 (3963MB)
> avail mem = 4023840768 (3837MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (64 entries)
> bios0: vendor LENOVO version "8DET73WW (1.43 )" date 10/12/2016
> bios0: LENOVO 4290N49
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA
> SSDT SSDT DMAR UEFI UEFI UEFI
> acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3)
> EHC2(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz, 2691.66 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: TSC frequency 2691663210 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz, 2691.26 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz, 2691.25 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz, 2691.26 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 2 (EXP1)
> acpiprt3 at acpi0: bus 3 (EXP2)
> acpiprt4 at acpi0: bus -1 (EXP4)
> acpiprt5 at acpi0: bus 13 (EXP5)
> acpiprt6 at acpi0: bus 14 (EXP7)
> acpicpu0 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1
> halt), PSS
> acpicpu1 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1
> halt), PSS
> acpicpu2 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1
> halt), PSS
> acpicpu3 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1
> halt), PSS
> acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
> acpitz0 at acpi0: critical temperature is 99 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> "PNP0303" at acpi0 not configured
> "LEN0020" at acpi0 not configured
> acpibat0 at acpi0: BAT0 model "45N1172" serial 13541 type LION oem "SANYO"
> acpiac0 at acpi0: AC unit offline
> acpithinkpad0 at acpi0
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpidock0 at acpi0: GDCK not docked (0)
> acpivideo0 at acpi0: VID_
> acpivout at acpivideo0 not configured
> acpivideo1 at acpi0: VID_
> cpu0: Enhanced SpeedStep 2691 MHz: speeds: 2701, 2700, 2400, 2200, 2000,
> 1800, 1600, 1400, 1200, 1000, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> f0:de:f1:7e:37:89
> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi,
> MIMO 2T2R, MoW, address 08:11:96:40:3e:18
> ppb2 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
> pci3 at ppb2 bus 13
> sdhc0 at pci3 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
> sdhc0: SDHC 3.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> ppb3 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
> pci4 at ppb3 bus 14
> xhci0 at pci4 dev 0 function 0 "NEC xHCI" rev 0x04: msi
> usb1 at xhci0: USB revision 3.0
> uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00
> addr 1
> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, MKNSSDTR480GB, P033> SCSI3 0/direct fixed
> naa.5888914304bcb000
> sd0: 457862MB, 512 bytes/sector, 937703088 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.0, 0x1e2b1 0x940300
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> vmm0 at mainbus0: VMX/EPT
> uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> scsibus2 at sdmmc0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <SD/MMC, 58BGO, 0009> SCSI2 0/direct removable
> sd1: 61087MB, 512 bytes/sector, 125106176 sectors
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd0a (26c53c52ed3c64be.a) swap on sd0b dump on sd0b
> sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> sd2: 427016MB, 512 bytes/sector, 874529905 sectors
> uhub3 detached
> uhub0 detached
> uhub1 detached
> uhub4 detached
> uhub2 detached
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00
> addr 1
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> sd1 detached
> scsibus2 detached
> uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> scsibus2 at sdmmc0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <SD/MMC, 58BGO, 0009> SCSI2 0/direct removable
> sd1: 61087MB, 512 bytes/sector, 125106176 sectors
> error: [drm:pid32684:intel_pipe_update_start] *ERROR* Potential atomic update
> failure on pipe A
>
> j...@jggimi.net (Josh Grosse), 2017.08.01 (Tue) 04:02 (CEST):
>> Feedback report
>> ---------------
>>
>> Hardware: Thinkpad X220.
>> Results: Excellent!
>> wsconsctl configuration changes: None.
>>
>> mouse.type=synaptics
>> mouse.rawmode=0
>> mouse.scale=1472,5768,1408,5062,0,65,136
>> mouse.tp.tapping=0
>> mouse.tp.scaling=0.163
>> mouse.tp.swapsides=0
>> mouse.tp.disable=0
>> mouse1.type=ps2
>> mouse2.type=usb
>>
>> OpenBSD 6.1-current (GENERIC.MP) #23: Sun Jul 30 17:07:49 MDT 2017
>> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> RTC BIOS diagnostic error 80<clock_battery>
>> real mem = 8451125248 (8059MB)
>> avail mem = 8188645376 (7809MB)
>> mpath0 at root
>> scsibus0 at mpath0: 256 targets
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (66 entries)
>> bios0: vendor LENOVO version "8DET73WW (1.43 )" date 10/12/2016
>> bios0: LENOVO 4291G26
>> acpi0 at bios0: rev 2
>> acpi0: sleep states S0 S3 S4 S5
>> acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA
>> SSDT SSDT DMAR UEFI UEFI UEFI
>> acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3)
>> EHC2(S3) HDEF(S4)
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpihpet0 at acpi0: 14318179 Hz
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2492.30 MHz
>> cpu0:
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
>> cpu0: 256KB 64b/line 8-way L2 cache
>> cpu0: TSC frequency 2492296960 Hz
>> cpu0: smt 0, core 0, package 0
>> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
>> cpu0: apic clock running at 99MHz
>> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
>> cpu1 at mainbus0: apid 1 (application processor)
>> cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.91 MHz
>> cpu1:
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
>> cpu1: 256KB 64b/line 8-way L2 cache
>> cpu1: smt 1, core 0, package 0
>> cpu2 at mainbus0: apid 2 (application processor)
>> cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.91 MHz
>> cpu2:
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
>> cpu2: 256KB 64b/line 8-way L2 cache
>> cpu2: smt 0, core 1, package 0
>> cpu3 at mainbus0: apid 3 (application processor)
>> cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.91 MHz
>> cpu3:
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
>> cpu3: 256KB 64b/line 8-way L2 cache
>> cpu3: smt 1, core 1, package 0
>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
>> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
>> acpiec0 at acpi0
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus -1 (PEG_)
>> acpiprt2 at acpi0: bus 2 (EXP1)
>> acpiprt3 at acpi0: bus 3 (EXP2)
>> acpiprt4 at acpi0: bus -1 (EXP4)
>> acpiprt5 at acpi0: bus 13 (EXP5)
>> acpiprt6 at acpi0: bus -1 (EXP7)
>> acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
>> acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
>> acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
>> acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
>> acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
>> acpitz0 at acpi0: critical temperature is 99 degC
>> acpibtn0 at acpi0: LID_
>> acpibtn1 at acpi0: SLPB
>> "PNP0303" at acpi0 not configured
>> "LEN0020" at acpi0 not configured
>> "SMO1200" at acpi0 not configured
>> acpibat0 at acpi0: BAT0 model "42T4875" serial 94 type LION oem
>> "Panasonic"
>> acpiac0 at acpi0: AC unit online
>> acpithinkpad0 at acpi0
>> "PNP0C14" at acpi0 not configured
>> "PNP0C14" at acpi0 not configured
>> acpidock0 at acpi0: GDCK not docked (0)
>> acpivideo0 at acpi0: VID_
>> acpivout at acpivideo0 not configured
>> acpivideo1 at acpi0: VID_
>> cpu0: Enhanced SpeedStep 2492 MHz: speeds: 2501, 2500, 2200, 2000, 1800,
>> 1600, 1400, 1200, 1000, 800 MHz
>> pci0 at mainbus0 bus 0
>> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
>> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
>> drm0 at inteldrm0
>> inteldrm0: msi
>> inteldrm0: 1366x768, 32bpp
>> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
>> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
>> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
>> f0:de:f1:78:7c:39
>> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
>> 2.00/1.00 addr 1
>> azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
>> azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590
>> audio0 at azalia0
>> ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
>> pci1 at ppb0 bus 2
>> ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
>> pci2 at ppb1 bus 3
>> rtwn0 at pci2 dev 0 function 0 "Realtek 8188CE" rev 0x01: msi
>> rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R, address ec:55:f9:c6:f9:40
>> ppb2 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
>> pci3 at ppb2 bus 13
>> sdhc0 at pci3 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
>> sdhc0: SDHC 3.0, 50 MHz base clock
>> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
>> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
>> usb1 at ehci1: USB revision 2.0
>> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
>> 2.00/1.00 addr 1
>> pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
>> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
>> ahci0: port 0: 6.0Gb/s
>> ahci0: port 2: 3.0Gb/s
>> scsibus1 at ahci0: 32 targets
>> sd0 at scsibus1 targ 0 lun 0: <ATA, SSD2SC240G1CS175, CS11> SCSI3 0/direct
>> fixed naa.5f8db4c115701558
>> sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
>> sd1 at scsibus1 targ 2 lun 0: <ATA, TS32GMSA370, N112> SCSI3 0/direct fixed
>> t10.ATA_TS32GMSA370_C528390021_
>> sd1: 30533MB, 512 bytes/sector, 62533296 sectors, thin
>> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2
>> int 18
>> iic0 at ichiic0
>> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
>> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
>> isa0 at pcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>> pckbd0 at pckbc0 (kbd slot)
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pms0 at pckbc0 (aux slot)
>> wsmouse0 at pms0 mux 0
>> wsmouse1 at pms0 mux 0
>> pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> aps0 at isa0 port 0x1600/31
>> vmm0 at mainbus0: VMX/EPT
>> efifb at mainbus0 not configured
>> uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
>> rev 2.00/0.00 addr 2
>> uhidev0 at uhub2 port 2 configuration 1 interface 0 "Performance Designed
>> Products Rock Candy Wireless Keyboard" rev 1.00/10.01 addr 3
>> uhidev0: iclass 3/1
>> ukbd0 at uhidev0: 8 variable keys, 6 key codes
>> wskbd1 at ukbd0 mux 1
>> wskbd1: connecting to wsdisplay0
>> uhidev1 at uhub2 port 2 configuration 1 interface 1 "Performance Designed
>> Products Rock Candy Wireless Keyboard" rev 1.00/10.01 addr 3
>> uhidev1: iclass 3/1
>> ums0 at uhidev1: 5 buttons, Z and W dir
>> wsmouse2 at ums0 mux 0
>> uhidev2 at uhub2 port 2 configuration 1 interface 2 "Performance Designed
>> Products Rock Candy Wireless Keyboard" rev 1.00/10.01 addr 3
>> uhidev2: iclass 3/0, 3 report ids
>> uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
>> uhid1 at uhidev2 reportid 3: input=2, output=0, feature=0
>> ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 4
>> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
>> rev 2.00/0.00 addr 2
>> vscsi0 at root
>> scsibus2 at vscsi0: 256 targets
>> softraid0 at root
>> scsibus3 at softraid0: 256 targets
>> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
>> sd2: 228935MB, 512 bytes/sector, 468860513 sectors
>> root on sd2a (84cf7725b144158a.a) swap on sd2b dump on sd2b
>>
>
>
