On Wed, Feb 01, 2006 at 01:19:58AM -0500, Peter wrote:
> I am running 3.8-stable with RAIDframe RAID-1 and two IDE disks (wd0
> and wd1). Everything thing seems to work (parity is good) but when I
> boot up I get two messages that worry me:
>
> raid0: Device already configured!
> "ioctl (RAIDFRAME_CONFIGURE) failed"
>
> Can anyone lend a hand in this important matter?
>
> There are some more seemingly good raid related messages after that but
> the machine is now at a remote location and I do not see any messages
> in the output of dmesg (the first line above is the last line from
> dmesg).
>
> The tail end of dmesg output is:
>
> Kernelized RAIDframe activated
> cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
> SENSE KEY: Not Ready
> ASC/ASCQ: Medium Not Present
> raid0 (root): (RAID Level 1) total number of sectors is 48234752 (23552
> MB) as root
> dkcsum: wd0 matches BIOS drive 0x80
> dkcsum: wd1 matches BIOS drive 0x81
> rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602
> raid0: Device already configured!
Is there any raidctl somewhere in rc, rc.local, or somesuch, other than
in rc where it reads /etc/raid[0-3].conf and checks parity?
Otherwise, check the contents of /etc/raid[0-3].conf...
Joachim
