I know you're all on the edge of your seat for the next episode in
this saga .. so here goes.
`make build` failed during the night (after 431 minutes build time)
while running configure for nsd. Here's the failing test:
checking size of off_t... pid 87911 (conftest): unaligned access:
va=0xdfdfdfdfdfdfdfef pc=0xbd7b2fe0 ra=0xbd7b3380 op=ldq
configure: error: in `/usr/src/usr.sbin/nsd/obj':
configure: error: cannot compute sizeof (off_t)
See `config.log' for more details
*** Error 77 in usr.sbin/nsd (Makefile.bsd-wrapper:53 'config.status')
*** Error 1 in usr.sbin (<bsd.subdir.mk>:48 'all')
*** Error 1 in . (<bsd.subdir.mk>:48 'all')
*** Error 1 in . (Makefile:95 'do-build')
*** Error 1 in /usr/src (Makefile:74 'build')
However, there was one other issue like that just before it (also
while configuring nsd):
checking whether the C compiler (cc) accepts the "format" attribute... yes
checking whether the C compiler (cc) accepts the "unused" attribute... yes
checking if memcmp compares unsigned... pid 27732 (conftest): unaligned access:
va=0xdfdfdfdfdfdfdfef pc=0x9de96fe0 ra=0x9de97380 op=ldq
no
checking whether ctime_r works with two arguments... yes
checking for libevent... found in /usr
Already talking to Florian (CC:'d) about this issue.
Paul 'WEiRD' de Weerd
On Sun, Mar 18, 2018 at 07:47:30PM +0100, Paul de Weerd wrote:
| Building a -current kernel took over an hour (I forgot to time it),
| but it worked! I'm now going to build a release, but that's going to
| take several hours, if the kernel build time is any indication...
|
| So here's the 6.3 dmesg (with some extra SCSI devices thrown into the
| mix, for fun):
|
| [ using 1147568 bytes of bsd ELF symbol table ]
| consinit: not using prom console
| Copyright (c) 1982, 1986, 1989, 1991, 1993
| The Regents of the University of California. All rights reserved.
| Copyright (c) 1995-2018 OpenBSD. All rights reserved. https://www.OpenBSD.org
|
| OpenBSD 6.3 (GENERIC) #0: Sun Mar 18 18:48:27 CET 2018
| we...@alfalfa.alm.weirdnet.nl:/usr/src/sys/arch/alpha/compile/GENERIC
| Digital Personal WorkStation 600au, 598MHz
| 8192 byte page size, 1 processor.
| real mem = 536870912 (512MB)
| rsvd mem = 1941504 (1MB)
| avail mem = 515710976 (491MB)
| mainbus0 at root
| cpu0 at mainbus0: ID 0 (primary), 21164A-0 (unknown minor type 0)
| cpu0: architecture extensions: 1<BWX>
| cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1
| cia0: extended capabilities: 1<BWEN>
| cia0: using BWX for PCI config and bus access
| cia0: WARNING: Pyxis pass 1 DMA bug; no bets...
| pci0 at cia0 bus 0
| dc0 at pci0 dev 3 function 0 "DEC 21142/3" rev 0x30: dec 550 irq 0, address
00:00:f8:76:04:64
| nsphy0 at dc0 phy 5: DP83840 10/100 PHY, rev. 1
| pciide0 at pci0 dev 4 function 0 "CMD Technology PCI0646" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
| atapiscsi0 at pciide0 channel 0 drive 0
| scsibus0 at atapiscsi0: 2 targets
| cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-6102B, 1106> ATAPI 5/cdrom
removable
| cd0(pciide0:0:0): using PIO mode 3, DMA mode 1
| pciide0: channel 1 disabled (no drives)
| sio0 at pci0 dev 7 function 0 "Intel 82378IB ISA" rev 0x43
| qlw0 at pci0 dev 12 function 0 "QLogic ISP1020" rev 0x05: dec 550 irq 8
| qlw0: firmware rev 4.66.0, attrs 0x0
| scsibus1 at qlw0: 16 targets, initiator 7
| cd1 at scsibus1 targ 0 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0167> SCSI2 5/cdrom
removable
| cd2 at scsibus1 targ 1 lun 0: <PIONEER, DVD-ROM DVD-303, 1.09> SCSI2 5/cdrom
removable
| cd3 at scsibus1 targ 2 lun 0: <MATSHITA, PD-2 LF-D100, A108> SCSI2 5/cdrom
removable
| cd4 at scsibus1 targ 3 lun 0: <PLEXTOR, CD-ROM PX-40TS, 1.12> SCSI2 5/cdrom
removable
| cd5 at scsibus1 targ 4 lun 0: <PLEXTOR, CD-R PX-W124TS, 1.07> SCSI2 5/cdrom
removable
| sd0 at scsibus1 targ 5 lun 0: <IOMEGA, ZIP 100, E.08> SCSI2 0/direct removable
| sd0: 96MB, 512 bytes/sector, 196608 sectors
| st0 at scsibus1 targ 6 lun 0: <HP, C1537A, L812> SCSI2 1/sequential removable
| sd1 at scsibus1 targ 8 lun 0: <SEAGATE, ST34371W, 0440> SCSI2 0/direct fixed
serial.SEAGATE_ST34371W_JDD273270M5E3P
| sd1: 4148MB, 512 bytes/sector, 8496884 sectors
| sd2 at scsibus1 targ 9 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed
serial.IBM_DCAS-34330W_F3TD8398_
| sd2: 4134MB, 512 bytes/sector, 8467200 sectors
| sd3 at scsibus1 targ 10 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed
serial.IBM_DCAS-34330W_F3TE2118_
| sd3: 4134MB, 512 bytes/sector, 8467200 sectors
| ppb0 at pci0 dev 20 function 0 "DEC 21152" rev 0x02
| pci1 at ppb0 bus 1
| fxp0 at pci1 dev 8 function 0 "Intel 8255x" rev 0x0c, i82550: dec 550 irq 12,
address 00:02:b3:61:21:e3
| inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
| fxp1 at pci1 dev 9 function 0 "Intel 8255x" rev 0x08, i82559: dec 550 irq 16,
address 00:02:b3:21:cd:c2
| inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
| vga0 at pci1 dev 10 function 0 "Matrox MGA 1064SG 220MHz" rev 0x02
| wsdisplay0 at vga0 mux 1
| wsdisplay0: screen 0-5 added (80x25, vt100 emulation)
| isa0 at sio0
| isadma0 at isa0
| fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
| com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
| com0: console
| com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
| pckbc0 at isa0 port 0x60/5 irq 1 irq 12
| pcppi0 at isa0 port 0x61
| spkr0 at pcppi0
| lpt0 at isa0 port 0x3bc/4 irq 7
| mcclock0 at isa0 port 0x70/2: mc146818 or compatible
| stray isa irq 14
| stray isa irq 3
| vscsi0 at root
| scsibus2 at vscsi0: 256 targets
| softraid0 at root
| scsibus3 at softraid0: 256 targets
| root on sd1a (92145ab06ead027c.a) swap on sd1b dump on sd1b
| fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
| stray isa irq 3
|
| --
| >++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
| +++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
| http://www.weirdnet.nl/
|
--
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
http://www.weirdnet.nl/
