last update .. Theo has built a new snapshot which I installed on the
alpha.  It works well, and after booting into it the nsd configure run
works just fine.

So, thanks to Theo for the latest snap :)

Cheers,

Paul 'WEiRD' de Weerd

[ using 1135448 bytes of bsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2018 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 6.3 (GENERIC) #0: Sun Mar 18 18:43:53 MDT 2018
    dera...@alpha.openbsd.org:/usr/src/sys/arch/alpha/compile/GENERIC
Digital Personal WorkStation 600au, 598MHz
8192 byte page size, 1 processor.
real mem = 536870912 (512MB)
rsvd mem = 1941504 (1MB)
avail mem = 515727360 (491MB)
mainbus0 at root
cpu0 at mainbus0: ID 0 (primary), 21164A-0 (unknown minor type 0)
cpu0: architecture extensions: 1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1
cia0: extended capabilities: 1<BWEN>
cia0: using BWX for PCI config and bus access
cia0: WARNING: Pyxis pass 1 DMA bug; no bets...
pci0 at cia0 bus 0
dc0 at pci0 dev 3 function 0 "DEC 21142/3" rev 0x30: dec 550 irq 0, address 
00:00:f8:76:04:64
nsphy0 at dc0 phy 5: DP83840 10/100 PHY, rev. 1
pciide0 at pci0 dev 4 function 0 "CMD Technology PCI0646" rev 0x01: DMA, 
channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-6102B, 1106> ATAPI 5/cdrom 
removable
cd0(pciide0:0:0): using PIO mode 3, DMA mode 1
pciide0: channel 1 disabled (no drives)
sio0 at pci0 dev 7 function 0 "Intel 82378IB ISA" rev 0x43
qlw0 at pci0 dev 12 function 0 "QLogic ISP1020" rev 0x05: dec 550 irq 8
qlw0: firmware rev 4.66.0, attrs 0x0
scsibus1 at qlw0: 16 targets, initiator 7
sd0 at scsibus1 targ 8 lun 0: <SEAGATE, ST34371W, 0440> SCSI2 0/direct fixed 
serial.SEAGATE_ST34371W_JDD273270M5E3P
sd0: 4148MB, 512 bytes/sector, 8496884 sectors
sd1 at scsibus1 targ 9 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed 
serial.IBM_DCAS-34330W_F3TD8398_
sd1: 4134MB, 512 bytes/sector, 8467200 sectors
sd2 at scsibus1 targ 10 lun 0: <IBM, DCAS-34330W, S65A> SCSI2 0/direct fixed 
serial.IBM_DCAS-34330W_F3TE2118_
sd2: 4134MB, 512 bytes/sector, 8467200 sectors
ppb0 at pci0 dev 20 function 0 "DEC 21152" rev 0x02
pci1 at ppb0 bus 1
fxp0 at pci1 dev 8 function 0 "Intel 8255x" rev 0x0c, i82550: dec 550 irq 12, 
address 00:02:b3:61:21:e3
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci1 dev 9 function 0 "Intel 8255x" rev 0x08, i82559: dec 550 irq 16, 
address 00:02:b3:21:cd:c2
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
vga0 at pci1 dev 10 function 0 "Matrox MGA 1064SG 220MHz" rev 0x02
wsdisplay0 at vga0 mux 1
wsdisplay0: screen 0-5 added (80x25, vt100 emulation)
isa0 at sio0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x3bc/4 irq 7
mcclock0 at isa0 port 0x70/2: mc146818 or compatible
stray isa irq 14
stray isa irq 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (92145ab06ead027c.a) swap on sd0b dump on sd0b
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
stray isa irq 3


-- 
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
                 http://www.weirdnet.nl/                 

Reply via email to