> Hi, > > I got a firewall server on OpenBSD 3.8/amd64, running on a > dual Intel EMT64, I hope this is right. > The machine is setup with ddb.panic=0 on the > /etc/sysctl.conf, but last night it got a page fault in supervisor > mode, I didn't have physical access to it, so this message > was read to me by someone else, it has on that > "system halted, press any key to reboot" dialog, and I asked > to reboot it (even with the backup carp fw UP, i > didn't want any downtime on it). > Anyone knows if there are any problems with ddb.panic=0 and > automatic reboot on this arch? > On boot i didn't got any dump with savecore, did i had to set > any sysctl to do automatic crash dump on kernel > fault? > > The machine got some carp ifaces, carp.preempt enabled, pf > with pfsync too. > I got some messages like this before the halt: > > /bsd: WARNING: mclpool limit reached; increase kern.maxclusters > > How could I get a good value for it? >
Hello. I would really suggest running i386 on this box. If SC1425 is just a tower version of SC1420 (and quickly scanning the dmesg seems to indicate that), you will get much lower interrupt load with the integrated NICs. Your pps rate may even double compared to amd64. When I was toying with amd64 on SC1420 it had some other quirks, so switching to i386 may help you with your original problem. > > The dmesg is here: > OpenBSD 3.8 (GENERIC.MP) #504: Sat Sep 10 16:02:38 MDT 2005 > > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 1073086464 (1047936K) > avail mem = 908865536 (887564K) > using 22937 buffers containing 107515904 bytes (104996K) of memory > mainbus0 (root) > mainbus0: Intel MP Specification (Version 1.4) (DELL PE SC1425 ) > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Xeon(TM) CPU 3.00GHz, 3000.49 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV, > PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG > cpu0: 2MB 64b/line 8-way L2 cache > cpu0: apic clock running at 200007064Hz > cpu1 at mainbus0: apid 6 (application processor) > cpu1: Intel(R) Xeon(TM) CPU 3.00GHz, 3000.11 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV, > PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG > cpu1: 2MB 64b/line 8-way L2 cache > mpbios: bus 0 is type PCI > mpbios: bus 1 is type PCI > mpbios: bus 2 is type PCI > mpbios: bus 3 is type PCI > mpbios: bus 4 is type PCI > mpbios: bus 5 is type ISA > ioapic0 at mainbus0 apid 8: pa 0xffff800001ba7f24, version 20, 24 pins > ioapic0: misconfigured as apic 0 > ioapic0: remapped to apic 8 > ioapic1 at mainbus0 apid 9: pa 0xffff800001ba7e24, version 20, 24 pins > ioapic1: misconfigured as apic 0 > ioapic1: remapped to apic 9 > ioapic2 at mainbus0 apid 10: pa 0xffff800001ba7d24, version > 20, 24 pins > ioapic2: misconfigured as apic 0 > ioapic2: remapped to apic 10 > pci0 at mainbus0 bus 0: configuration mode 1 > pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x09 > ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x09 > pci1 at ppb0 bus 1 > ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 > pci2 at ppb1 bus 2 > em0 at pci2 dev 4 function 0 "Intel PRO/1000MT (82541GI)" rev > 0x05: apic 9 int 0 (irq 11), address: > 00:14:22:72:28:60 > ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 > pci3 at ppb2 bus 3 > uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev > 0x02: apic 8 int 16 (irq 11) > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 > uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev > 0x02: apic 8 int 19 (irq 10) > usb1 at uhci1: USB revision 1.0 > uhub1 at usb1 > uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB" rev > 0x02: apic 8 int 23 (irq 6) > usb2 at ehci0: USB revision 2.0 > uhub2 at usb2 > uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1 > uhub2: 4 ports with 4 removable, self powered > ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2 > pci4 at ppb3 bus 4 > em1 at pci4 dev 3 function 0 "Intel PRO/1000MT (82541GI)" rev > 0x05: apic 8 int 20 (irq 3), address: > 00:14:22:72:28:61 > vga1 at pci4 dev 13 function 0 "ATI Radeon VE QY" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > "Intel 82801EB/ER LPC" rev 0x02 at pci0 dev 31 function 0 not > configured > pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev > 0x02: DMA, channel 0 configured to compatibility, > channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-ROM CD-224E-N, 3.AB> > SCSI0 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev > 0x02: DMA, channel 0 configured to native-PCI, > channel 1 configured to native-PCI > pciide1: using apic 8 int 18 (irq 5) for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75LSA0> > wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > isa0 at mainbus0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > sysbeep0 at pcppi0 > dkcsum: wd0 matches BIOS drive 0x80 > root on wd0a > rootdev=0x0 rrootdev=0x300 rawdev=0x302 > WARNING: / was not properly unmounted
