Hello, considering that 6.6 nuked X for my T23 as mentioned in previous recent post, I decided to refresh my old Dell L400, which was lagging behind at 6.2, with a fresh 6.6 install.
Unfortunately X crashes. The first error in the log file was about setting machdep.allowaperture=1 and rebooting (I always used 2 before). After changing its value in sysctl.conf to 1, this is the new error in the log file: X.Org X Server 1.20.5 X Protocol Version 11, Revision 0 [ 206.190] Build Operating System: OpenBSD 6.6 i386 [ 206.190] Current Operating System: OpenBSD argento.local 6.6 GENERIC#6 i386 [ 206.192] Build Date: 12 October 2019 11:55:53AM [ 206.192] [ 206.192] Current version of pixman: 0.38.4 [ 206.192] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 206.192] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 206.193] (==) Log file: "/home/pasha/.local/share/xorg/Xorg.0.log", Time: Sat Apr 18 03:10:40 2020 [ 206.365] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 206.424] (==) No Layout section. Using the first Screen section. [ 206.424] (==) No screen section available. Using defaults. [ 206.424] (**) |-->Screen "Default Screen Section" (0) [ 206.424] (**) | |-->Monitor "<default monitor>" [ 206.448] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 206.448] (==) Automatically adding devices [ 206.449] (==) Automatically enabling devices [ 206.449] (==) Not automatically adding GPU devices [ 206.476] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 207.101] (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 207.101] (==) ModulePath set to "/usr/X11R6/lib/modules" [ 207.101] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [ 207.101] (II) Loader magic: 0x351fe000 [ 207.101] (II) Module ABI versions: [ 207.101] X.Org ANSI C Emulation: 0.4 [ 207.101] X.Org Video Driver: 24.0 [ 207.101] X.Org XInput driver : 24.1 [ 207.101] X.Org Server Extension : 10.0 [ 207.121] (EE) Fatal server error: [ 207.122] *(EE) xf86OpenConsole: No console driver found Supported drivers: wscons Check your kernel's console driver configuration and /dev entries*(EE) [ 207.122] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 207.122] (EE) Please also check the log file at "/home/pasha/.local/share/xorg/Xorg.0.log" for additional information. [ 207.122] (EE) [ 207.170] (EE) Server terminated with error (1). Closing log file. As far as I know from https://www.openbsd.org/faq/upgrade66.html the ATI driver shouldn't be in the recently killed ones, as I get from dmesg: OpenBSD 6.6 (GENERIC) #6: Thu Mar 12 09:36:01 MDT 2020 r...@syspatch-66-i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC real mem = 267862016 (255MB) avail mem = 247291904 (235MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 05/09/03, BIOS32 rev. 0 @ 0xfd7a0, SMBIOS rev. 2.3 @ 0xdc010 (28 entries) bios0: vendor Quanta Computer version "A09(Q3J01)" date 05/09/2001 bios0: Dell Computer Corp. Latitude L400 acpi0 at bios0: ACPI 1.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP BOOT acpi0: wakeup devices PCI0(S3) COMA(S3) CRD0(S3) MDEM(S3) LID_(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (AGP_) acpicpu0 at acpi0: !C3(@20 io@0x8015), !C2(@10 io@0x8014), C1(@1 halt!) acpitz0 at acpi0: critical temperature is 97 degC "PNP0A03" at acpi0 not configured acpicmos0 at acpi0 acpibtn0 at acpi0: LID_ acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT1 model "SI-QT17" serial type LION oem "SANYO" acpibtn1 at acpi0: SBTN bios0: ROM list: 0xc0000/0x10000 0xd0000/0x800! 0xdc000/0x4000! cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium III ("GenuineIntel" 686-class) 698 MHz, 06-08-0a cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE,PERF,MELTDOWN mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03 intelagp0 at pchb0 *agp0 at intelagp0: aperture at 0xf8000000, size 0x4000000* ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03 pci1 at ppb0 bus 1 *vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)wsdisplay0: screen 1-5 added (80x25, vt100 emulation)* piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1032GAX> wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11 piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI iic0 at piixpm0 spdmem0 at iic0 addr 0x50: 256MB SDRAM non-parity PC100CL2 clct0 at pci0 dev 8 function 0 "Cirrus Logic CS4281 CrystalClear" rev 0x01: irq 10 ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4) ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D audio0 at clct0 cbb0 at pci0 dev 10 function 0 "TI PCI1410 CardBus" rev 0x01: irq 10 xl0 at pci0 dev 13 function 0 "3Com 3c905C" rev 0x78: irq 10, address 00:06:5b:37:34:b5 bmtphy0 at xl0 phy 24: 3C905C internal PHY, rev. 7 "AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 16 function 0 not configured isa0 at piixpcib0 isadma0 at isa0 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pms0: Synaptics clickpad, firmware 4.1, 0x8848a1 0x3b4700 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20 pcmcia0 at cardslot0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (6ecc47f070a27c7b.a) swap on wd0b dump on wd0b ath0 at cardbus0 dev 0 function 0 "Atheros AR5212" rev 0x01: irq 10 ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3 eeprom 3.4, FCC2A*, address 00:02:6f:20:16:b7 So what can this be???? It had always worked before (at least I know it for sure till 6.2). Thanks in advance for your answers.
